https://wiki.postmarketos.org/api.php?action=feedcontributions&user=St.S&feedformat=atom
postmarketOS - User contributions [en]
2024-03-28T20:22:00Z
User contributions
MediaWiki 1.39.6
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)&diff=35445
Samsung Galaxy S6 Edge (samsung-zeroltexx)
2023-01-06T23:34:44Z
<p>St.S: /* Hardware / sensors */</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6 Edge<br />
| codename = samsung-zeroltexx<br />
| image = File:samsung-zeroltexx.jpg<br />
| imagecaption = Samsung Galaxy S6 Edge<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0-7.0<br />
| chipset = Samsung Exynos 7420 Octa<br />
| cpu = Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760MP8<br />
| storage = 32/64/128 GB<br />
| display = 1440 x 2560 Super AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --><br />
| status_usbnet = Y<br />
| status_flashing = P<br />
| status_touch = Y<br />
| status_screen = Y<br />
| status_wifi = Y<br />
| status_xwayland = N<br />
| status_fde = <br />
| status_mainline = <br />
| status_battery = <!-- Charging the battery with charging-sdl is possible --><br />
| status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) --><br />
| status_accel = <!-- The sensor that measures proper acceleration works --><br />
| status_audio = Y<br />
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol --><br />
| status_camera = <!-- Taking photos and videos works. --><br />
| status_gps = <!-- The Global Positioning System sensor works. --><br />
| status_mobiledata = <!-- Connecting to the Internet via cellular network. --><br />
| status_sms = <!-- Sending and receiving short messages works as intended. --><br />
| status_calls = <!-- Talking to other people over the cellular network. --><br />
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" --><br />
| booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* --><br />
<br />
<!-- you can also use these lines if you need to: --><br />
| pmoskernel = 3.10.108<br />
<!-- see Unixbench page on wiki --><br />
| whet_dhry = 3096.2<br />
<!-- Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* [[user:Aleksas|Aleksas]]<br />
* [[user:St.S|St.S]]<br />
<br />
== Maintainer(s) ==<br />
<!-- Only if this device doesn't run on linux-postmarketos yet! --><br />
<!-- This person needs to be willing to answer questions from users of this device --><br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<!-- autogenerated, use {{Owns device|devicepage|notes}} on your profile page --><br />
<!-- use _ instead of spaces in device page name, e.g. {{Owns device|HTC_Desire_(htc-bravo)|custom notes}}--><br />
<!-- you may need to purge page cache to see changes (more->purge cache)--><br />
<!-- you can use {{My devices}} on your profile page to show table with all your devices --><br />
<br />
== What works ==<br />
* Xfce4, Mate, Sxmo user interfaces<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery zip]] and flash it with TWRP.<br />
<!-- add more sections below as necessary, e.g. WiFi, photos, ... --><br />
<br />
== Hardware / sensors ==<br />
Results from <code>sudo hwtest</code> on SM-G925T:<br />
<div class="toccolours mw-collapsible mw-collapsed" style="width:600px; overflow:auto;"><br />
hwtest<br />
<div class="mw-collapsible-content"><br />
{| class="wikitable feature-colors"<br />
! style="text-align:left;"| Category<br />
! style="text-align:left;"| Model<br />
! style="text-align:left;"| Path<br />
! style="text-align:left;"| Status<br />
! style="text-align:left;"| Value<br />
|-<br />
|framebuffer<br />
|<br />
|/sys/class/graphics/fb0<br />
| class="feature-yes"| Working<br />
|U:1440x2560p-59<br />
|-<br />
|framebuffer<br />
|<br />
|/sys/class/graphics/fb1<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|certify_hall<br />
|/dev/input/event18<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|hall<br />
|/dev/input/event17<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|dt2w_power_key<br />
|/dev/input/event16<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|gpio_keys.31<br />
|/dev/input/event15<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|Headset<br />
|/dev/input/event14<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|ssp_context<br />
|/dev/input/event13<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|meta_event<br />
|/dev/input/event12<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|interrupt_gyro_sensor<br />
|/dev/input/event11<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|step_cnt_sensor<br />
|/dev/input/event10<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|sig_motion_sensor<br />
|/dev/input/event9<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|gesture_sensor<br />
|/dev/input/event8<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|temp_humidity_sensor<br />
|/dev/input/event7<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|grip_sensor<br />
|/dev/input/event6<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|proximity_sensor<br />
|/dev/input/event5<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|light_ir_sensor<br />
|/dev/input/event4<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|light_sensor<br />
|/dev/input/event3<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|hrmled_sensor<br />
|/dev/input/event2<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|hrm_sensor<br />
|/dev/input/event1<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|sec_touchscreen<br />
|/dev/input/event0<br />
| class="feature-yes"| Working<br />
|<br />
|}<br />
</div><br />
</div><br />
<br />
Results from <code>sensors</code> (package lm-sensors) on SM-G925T:<br />
<div class="toccolours mw-collapsible mw-collapsed" style="width:600px; overflow:auto;"><br />
sensors<br />
<div class="mw-collapsible-content"><br />
<source><br />
exynos-therm-virtual-0<br />
Adapter: Virtual device<br />
temp1: +37.0C (crit = +75.0C)<br />
<br />
max77843-fuelgauge-virtual-0<br />
Adapter: Virtual device<br />
temp1: +29.0C<br />
<br />
ac-virtual-0<br />
Adapter: Virtual device<br />
temp1: +31.5C<br />
<br />
battery-virtual-0<br />
Adapter: Virtual device<br />
temp1: +29.0C<br />
</source><br />
</div><br />
</div><br />
<br />
For reference, sensor information from sensorssandbox (f-droid) on SM-G925T; note that in addition to hardware-based sensors, it presumably includes software-based / derived sensors:<br />
<div class="toccolours mw-collapsible mw-collapsed" style="width:600px; overflow:auto;"><br />
sensor details (sensorssandbox)<br />
<div class="mw-collapsible-content"><br />
{| class="wikitable feature-colors"<br />
! style="text-align:left;"| name<br />
! style="text-align:left;"| vendor<br />
! style="text-align:left;"| version<br />
! style="text-align:left;"| type<br />
|-<br />
|MPU6500 acceleration sensor<br />
|Invensense<br />
|1<br />
|1<br />
|-<br />
|YAS537 magnetic sensor<br />
|Yamaha corp<br />
|1<br />
|2<br />
|-<br />
|MPU6500 gyroscope sensor<br />
|Invensense<br />
|1<br />
|4<br />
|-<br />
|LPS25H barometric sensor<br />
|STMicroelectronics<br />
|1<br />
|6<br />
|-<br />
|TMD49XX proximity sensor<br />
|AMS, inc<br />
|1<br />
|8<br />
|-<br />
|TMD49XX RGB sensor<br />
|AMS, inc<br />
|1<br />
|5<br />
|-<br />
|YAS537 uncalibrated magnetic sensor<br />
|Yamaha corp<br />
|1<br />
|14<br />
|-<br />
|Samsung step detector sensor<br />
|Samsung, inc<br />
|1<br />
|18<br />
|-<br />
|Samsung significant motion sensor<br />
|Samsung, inc<br />
|2<br />
|17<br />
|-<br />
|MPU6500 gyrosope sensor uncalibrated<br />
|Invensense<br />
|1<br />
|16<br />
|-<br />
|MPL game rotation vector<br />
|Invensense<br />
|1<br />
|15<br />
|-<br />
|MPL rotation vector<br />
|Invensense<br />
|1<br />
|11<br />
|-<br />
|Samsung step counter sensor<br />
|Samsung, inc<br />
|1<br />
|19<br />
|-<br />
|Grip sensor<br />
|Semtech<br />
|512<br />
|65560<br />
|-<br />
|TMD49XX RGB IR sensor<br />
|AMS, inc<br />
|1<br />
||65578<br />
|-<br />
|Interrupt gyroscope sensor<br />
|Invensense<br />
|1<br />
|65579<br />
|-<br />
|Samsung tilt detector<br />
|Samsung, inc<br />
|1<br />
|22<br />
|-<br />
|Samsung pick up gesture<br />
|Samsung, inc<br />
|1<br />
|25<br />
|-<br />
|Screen orientation sensor<br />
|Samsung, inc<br />
|3<br />
|65558<br />
|-<br />
|Motion sensor<br />
|Samsung, inc<br />
|1<br />
|65559<br />
|-<br />
|Gravity sensor<br />
|Samsung, inc<br />
|3<br />
|9<br />
|-<br />
|Linear acceleration sensor<br />
|Samsung, inc<br />
|3<br />
|10<br />
|-<br />
|Orientation sensor<br />
|Samsung, inc<br />
|1<br />
|3<br />
|}<br />
</div><br />
</div><br />
<br />
The following refers to SM-G925F (zeroltexx) and SM-G920F (zerofltexx): Some of the sensors, as well as the infrared (remote control) sender LED, can be activated by first initializing the sensorhub with a firmware blob (which Android does within the "lhd" daemon). This firmware blob is actually compiled into the downstream kernel already (readable in device /dev/bbd_patch), but needs to be uploaded to the sensor hub chip using a special packetized protocol in /dev/bbd_packet. An example Rust program for doing that is available [https://gitlab.com/st.s/init_sensorhub here].<br />
<br />
== See also ==<br />
* [https://www.gsmarena.com/samsung_galaxy_s6_edge-7079.php Smartphone specifications]<br />
* [https://wiki.lineageos.org/devices/zeroltexx Device info (LineageOS)]<br />
* [https://twrp.me/samsung/samsunggalaxys6edge.html TWRP for Samsung Galaxy S6 Edge]<br />
* [https://github.com/jcadduono/nethunter_kernel_noblelte/tree/twrp-6.0 Kernel used (TWRP's kernel)]<br />
* [https://gitlab.com/postmarketOS/pmaports/-/merge_requests/2105 Newer port, using different kernel]<br />
<!--<br />
Link to related GitLab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):<br />
* {{MR|CHANGEME|pmaports}} Initial merge request<br />
* {{issue|CHANGEME|pmaports}} Some related issue<br />
You can also add normal web links:<br />
* [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]<br />
--><br />
<!--<br />
If you manage to get your device packages merged, uncomment links below.<br />
* {{Device package|samsung-zeroltexx}}<br />
* {{Kernel package|samsung-zeroltexx}}<br />
--></div>
St.S
https://wiki.postmarketos.org/index.php?title=User:St.S&diff=35441
User:St.S
2023-01-06T22:00:01Z
<p>St.S: /* Owns devices */</p>
<hr />
<div><div style="float: right;"><br />
{{User main device|Samsung Galaxy S6 edge (samsung-zeroltexx)}}<br />
{{User GitLab|st.s}}<br />
</div><br />
<br />
Matrix: @st.s:matrix.org<br />
<br />
GitLab: https://gitlab.com/st.s<br />
<br />
== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx)|booting w/USB,ssh access,display,touch,wifi,audio,bluetooth;camera,sensors,ir-tx with some user-space helper programs}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|booting w/USB,ssh access,display,touch,wifi,audio,bluetooth;camera,sensors,ir-tx with some user-space helper programs}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)&diff=35440
Samsung Galaxy S6 Edge (samsung-zeroltexx)
2023-01-06T21:56:46Z
<p>St.S: /* Hardware / sensors */</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6 Edge<br />
| codename = samsung-zeroltexx<br />
| image = File:samsung-zeroltexx.jpg<br />
| imagecaption = Samsung Galaxy S6 Edge<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0-7.0<br />
| chipset = Samsung Exynos 7420 Octa<br />
| cpu = Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760MP8<br />
| storage = 32/64/128 GB<br />
| display = 1440 x 2560 Super AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --><br />
| status_usbnet = Y<br />
| status_flashing = P<br />
| status_touch = Y<br />
| status_screen = Y<br />
| status_wifi = Y<br />
| status_xwayland = N<br />
| status_fde = <br />
| status_mainline = <br />
| status_battery = <!-- Charging the battery with charging-sdl is possible --><br />
| status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) --><br />
| status_accel = <!-- The sensor that measures proper acceleration works --><br />
| status_audio = Y<br />
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol --><br />
| status_camera = <!-- Taking photos and videos works. --><br />
| status_gps = <!-- The Global Positioning System sensor works. --><br />
| status_mobiledata = <!-- Connecting to the Internet via cellular network. --><br />
| status_sms = <!-- Sending and receiving short messages works as intended. --><br />
| status_calls = <!-- Talking to other people over the cellular network. --><br />
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" --><br />
| booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* --><br />
<br />
<!-- you can also use these lines if you need to: --><br />
| pmoskernel = 3.10.108<br />
<!-- see Unixbench page on wiki --><br />
| whet_dhry = 3096.2<br />
<!-- Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* [[user:Aleksas|Aleksas]]<br />
* [[user:St.S|St.S]]<br />
<br />
== Maintainer(s) ==<br />
<!-- Only if this device doesn't run on linux-postmarketos yet! --><br />
<!-- This person needs to be willing to answer questions from users of this device --><br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<!-- autogenerated, use {{Owns device|devicepage|notes}} on your profile page --><br />
<!-- use _ instead of spaces in device page name, e.g. {{Owns device|HTC_Desire_(htc-bravo)|custom notes}}--><br />
<!-- you may need to purge page cache to see changes (more->purge cache)--><br />
<!-- you can use {{My devices}} on your profile page to show table with all your devices --><br />
<br />
== What works ==<br />
* Xfce4, Mate, Sxmo user interfaces<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery zip]] and flash it with TWRP.<br />
<!-- add more sections below as necessary, e.g. WiFi, photos, ... --><br />
<br />
== Hardware / sensors ==<br />
Results from <code>sudo hwtest</code> on SM-G925T:<br />
<div class="toccolours mw-collapsible mw-collapsed" style="width:600px; overflow:auto;"><br />
hwtest<br />
<div class="mw-collapsible-content"><br />
{| class="wikitable feature-colors"<br />
! style="text-align:left;"| Category<br />
! style="text-align:left;"| Model<br />
! style="text-align:left;"| Path<br />
! style="text-align:left;"| Status<br />
! style="text-align:left;"| Value<br />
|-<br />
|framebuffer<br />
|<br />
|/sys/class/graphics/fb0<br />
| class="feature-yes"| Working<br />
|U:1440x2560p-59<br />
|-<br />
|framebuffer<br />
|<br />
|/sys/class/graphics/fb1<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|certify_hall<br />
|/dev/input/event18<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|hall<br />
|/dev/input/event17<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|dt2w_power_key<br />
|/dev/input/event16<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|gpio_keys.31<br />
|/dev/input/event15<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|Headset<br />
|/dev/input/event14<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|ssp_context<br />
|/dev/input/event13<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|meta_event<br />
|/dev/input/event12<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|interrupt_gyro_sensor<br />
|/dev/input/event11<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|step_cnt_sensor<br />
|/dev/input/event10<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|sig_motion_sensor<br />
|/dev/input/event9<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|gesture_sensor<br />
|/dev/input/event8<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|temp_humidity_sensor<br />
|/dev/input/event7<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|grip_sensor<br />
|/dev/input/event6<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|proximity_sensor<br />
|/dev/input/event5<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|light_ir_sensor<br />
|/dev/input/event4<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|light_sensor<br />
|/dev/input/event3<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|hrmled_sensor<br />
|/dev/input/event2<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|hrm_sensor<br />
|/dev/input/event1<br />
| class="feature-yes"| Working<br />
|<br />
|-<br />
|input<br />
|sec_touchscreen<br />
|/dev/input/event0<br />
| class="feature-yes"| Working<br />
|<br />
|}<br />
</div><br />
</div><br />
<br />
Results from <code>sensors</code> (package lm-sensors) on SM-G925T:<br />
<div class="toccolours mw-collapsible mw-collapsed" style="width:600px; overflow:auto;"><br />
sensors<br />
<div class="mw-collapsible-content"><br />
<source><br />
exynos-therm-virtual-0<br />
Adapter: Virtual device<br />
temp1: +37.0C (crit = +75.0C)<br />
<br />
max77843-fuelgauge-virtual-0<br />
Adapter: Virtual device<br />
temp1: +29.0C<br />
<br />
ac-virtual-0<br />
Adapter: Virtual device<br />
temp1: +31.5C<br />
<br />
battery-virtual-0<br />
Adapter: Virtual device<br />
temp1: +29.0C<br />
</source><br />
</div><br />
</div><br />
<br />
For reference, sensor information from sensorssandbox (f-droid) on SM-G925T; note that in addition to hardware-based sensors, it presumably includes software-based / derived sensors:<br />
<div class="toccolours mw-collapsible mw-collapsed" style="width:600px; overflow:auto;"><br />
sensor details (sensorssandbox)<br />
<div class="mw-collapsible-content"><br />
{| class="wikitable feature-colors"<br />
! style="text-align:left;"| name<br />
! style="text-align:left;"| vendor<br />
! style="text-align:left;"| version<br />
! style="text-align:left;"| type<br />
|-<br />
|MPU6500 acceleration sensor<br />
|Invensense<br />
|1<br />
|1<br />
|-<br />
|YAS537 magnetic sensor<br />
|Yamaha corp<br />
|1<br />
|2<br />
|-<br />
|MPU6500 gyroscope sensor<br />
|Invensense<br />
|1<br />
|4<br />
|-<br />
|LPS25H barometric sensor<br />
|STMicroelectronics<br />
|1<br />
|6<br />
|-<br />
|TMD49XX proximity sensor<br />
|AMS, inc<br />
|1<br />
|8<br />
|-<br />
|TMD49XX RGB sensor<br />
|AMS, inc<br />
|1<br />
|5<br />
|-<br />
|YAS537 uncalibrated magnetic sensor<br />
|Yamaha corp<br />
|1<br />
|14<br />
|-<br />
|Samsung step detector sensor<br />
|Samsung, inc<br />
|1<br />
|18<br />
|-<br />
|Samsung significant motion sensor<br />
|Samsung, inc<br />
|2<br />
|17<br />
|-<br />
|MPU6500 gyrosope sensor uncalibrated<br />
|Invensense<br />
|1<br />
|16<br />
|-<br />
|MPL game rotation vector<br />
|Invensense<br />
|1<br />
|15<br />
|-<br />
|MPL rotation vector<br />
|Invensense<br />
|1<br />
|11<br />
|-<br />
|Samsung step counter sensor<br />
|Samsung, inc<br />
|1<br />
|19<br />
|-<br />
|Grip sensor<br />
|Semtech<br />
|512<br />
|65560<br />
|-<br />
|TMD49XX RGB IR sensor<br />
|AMS, inc<br />
|1<br />
||65578<br />
|-<br />
|Interrupt gyroscope sensor<br />
|Invensense<br />
|1<br />
|65579<br />
|-<br />
|Samsung tilt detector<br />
|Samsung, inc<br />
|1<br />
|22<br />
|-<br />
|Samsung pick up gesture<br />
|Samsung, inc<br />
|1<br />
|25<br />
|-<br />
|Screen orientation sensor<br />
|Samsung, inc<br />
|3<br />
|65558<br />
|-<br />
|Motion sensor<br />
|Samsung, inc<br />
|1<br />
|65559<br />
|-<br />
|Gravity sensor<br />
|Samsung, inc<br />
|3<br />
|9<br />
|-<br />
|Linear acceleration sensor<br />
|Samsung, inc<br />
|3<br />
|10<br />
|-<br />
|Orientation sensor<br />
|Samsung, inc<br />
|1<br />
|3<br />
|}<br />
</div><br />
</div><br />
<br />
The following refers to SM-G925F (zeroltexx) and SM-G920F (zerofltexx): Some of the sensors, as well as the infrared (remote control) sender LED, can be activated by first initializing the sensorhub with a firmware blob (which Android does within the "lhd" daemon). This firmware blob is actually compiled into the downstream kernel already (readable in device /dev/bbd_patch), but needs to be uploaded to the sensor hub chip using a special packetized protocol in /dev/bbd_packet. Will post example Rust program for doing that soon.<br />
<br />
== See also ==<br />
* [https://www.gsmarena.com/samsung_galaxy_s6_edge-7079.php Smartphone specifications]<br />
* [https://wiki.lineageos.org/devices/zeroltexx Device info (LineageOS)]<br />
* [https://twrp.me/samsung/samsunggalaxys6edge.html TWRP for Samsung Galaxy S6 Edge]<br />
* [https://github.com/jcadduono/nethunter_kernel_noblelte/tree/twrp-6.0 Kernel used (TWRP's kernel)]<br />
* [https://gitlab.com/postmarketOS/pmaports/-/merge_requests/2105 Newer port, using different kernel]<br />
<!--<br />
Link to related GitLab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):<br />
* {{MR|CHANGEME|pmaports}} Initial merge request<br />
* {{issue|CHANGEME|pmaports}} Some related issue<br />
You can also add normal web links:<br />
* [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]<br />
--><br />
<!--<br />
If you manage to get your device packages merged, uncomment links below.<br />
* {{Device package|samsung-zeroltexx}}<br />
* {{Kernel package|samsung-zeroltexx}}<br />
--></div>
St.S
https://wiki.postmarketos.org/index.php?title=User:St.S&diff=35439
User:St.S
2023-01-06T21:45:39Z
<p>St.S: /* Owns devices */</p>
<hr />
<div><div style="float: right;"><br />
{{User main device|Samsung Galaxy S6 edge (samsung-zeroltexx)}}<br />
{{User GitLab|st.s}}<br />
</div><br />
<br />
Matrix: @st.s:matrix.org<br />
<br />
GitLab: https://gitlab.com/st.s<br />
<br />
== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx)|booting w/USB,ssh access,display,touch,wifi,audio;camera,sensors,ir-tx with some user-space helper programs}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|booting w/USB,ssh access,display,touch,wifi,audio;camera,sensors,ir-tx with some user-space helper programs}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=User:St.S&diff=20275
User:St.S
2021-06-29T21:43:51Z
<p>St.S: /* Owns devices */</p>
<hr />
<div><div style="float: right;"><br />
{{User main device|Samsung Galaxy S6 edge (samsung-zeroltexx)}}<br />
{{User GitLab|st.s}}<br />
</div><br />
<br />
Matrix: @st.s:matrix.org<br />
<br />
GitLab: https://gitlab.com/st.s<br />
<br />
== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx)|booting w/USB,ssh access,display,touch,wifi,audio}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|booting w/USB,ssh access,display,touch,wifi,audio}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)&diff=20274
Samsung Galaxy S6 Edge (samsung-zeroltexx)
2021-06-29T21:41:44Z
<p>St.S: update after MR 2105 and 2263</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6 Edge<br />
| codename = samsung-zeroltexx<br />
| image = File:samsung-zeroltexx.jpg<br />
| imagecaption = Samsung Galaxy S6 Edge<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0-7.0<br />
| chipset = Exynos 7420 Octa<br />
| cpu = Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760MP8<br />
| storage = 32/64/128 GB<br />
| display = 1440 x 2560 Super AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --><br />
| status_usbnet = Y<br />
| status_flashing = P<br />
| status_touch = Y<br />
| status_screen = Y<br />
| status_wifi = Y<br />
| status_xwayland = N<br />
| status_fde = <br />
| status_mainline = <br />
| status_battery = <!-- Charging the battery with charging-sdl is possible --><br />
| status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) --><br />
| status_accel = <!-- The sensor that measures proper acceleration works --><br />
| status_audio = Y<br />
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol --><br />
| status_camera = <!-- Taking photos and videos works. --><br />
| status_gps = <!-- The Global Positioning System sensor works. --><br />
| status_mobiledata = <!-- Connecting to the Internet via cellular network. --><br />
| status_sms = <!-- Sending and receiving short messages works as intended. --><br />
| status_calls = <!-- Talking to other people over the cellular network. --><br />
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" --><br />
| booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* --><br />
<br />
<!-- you can also use these lines if you need to: --><br />
| pmoskernel = 3.10.108<br />
<!-- see Unixbench page on wiki --><br />
| whet_dhry = 3096.2<br />
<!-- Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* [[user:Aleksas|Aleksas]]<br />
* [[user:St.S|St.S]]<br />
<br />
== Maintainer(s) ==<br />
<!-- Only if this device doesn't run on linux-postmarketos yet! --><br />
<!-- This person needs to be willing to answer questions from users of this device --><br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<!-- autogenerated, use {{Owns device|devicepage|notes}} on your profile page --><br />
<!-- use _ instead of spaces in device page name, e.g. {{Owns device|HTC_Desire_(htc-bravo)|custom notes}}--><br />
<!-- you may need to purge page cache to see changes (more->purge cache)--><br />
<!-- you can use {{My devices}} on your profile page to show table with all your devices --><br />
<br />
== What works ==<br />
* Xfce4, Mate, Sxmo user interfaces<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery zip]] and flash it with TWRP.<br />
<!-- add more sections below as necessary, e.g. WiFi, photos, ... --><br />
<br />
== See also ==<br />
* [https://www.gsmarena.com/samsung_galaxy_s6_edge-7079.php Smartphone specifications]<br />
* [https://wiki.lineageos.org/devices/zeroltexx Device info (LineageOS)]<br />
* [https://twrp.me/samsung/samsunggalaxys6edge.html TWRP for Samsung Galaxy S6 Edge]<br />
* [https://github.com/jcadduono/nethunter_kernel_noblelte/tree/twrp-6.0 Kernel used (TWRP's kernel)]<br />
* [https://gitlab.com/postmarketOS/pmaports/-/merge_requests/2105 Newer port, using different kernel]<br />
<!--<br />
Link to related GitLab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):<br />
* {{MR|CHANGEME|pmaports}} Initial merge request<br />
* {{issue|CHANGEME|pmaports}} Some related issue<br />
You can also add normal web links:<br />
* [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]<br />
--><br />
<!--<br />
If you manage to get your device packages merged, uncomment links below.<br />
* {{Device package|samsung-zeroltexx}}<br />
* {{Kernel package|samsung-zeroltexx}}<br />
--></div>
St.S
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)&diff=20273
Samsung Galaxy S6 Edge (samsung-zeroltexx)
2021-06-29T21:36:53Z
<p>St.S: /* Contributors */</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6 Edge<br />
| codename = samsung-zeroltexx<br />
| image = File:samsung-zeroltexx.jpg<br />
| imagecaption = Samsung Galaxy S6 Edge<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0-7.0<br />
| chipset = Exynos 7420 Octa<br />
| cpu = Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760MP8<br />
| storage = 32/64/128 GB<br />
| display = 1440 x 2560 Super AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --><br />
| status_usbnet = P<br />
| status_flashing = <br />
| status_touch = Y<br />
| status_screen = Y<br />
| status_wifi = <br />
| status_xwayland = N<br />
| status_fde = <br />
| status_mainline = <br />
| status_battery = <!-- Charging the battery with charging-sdl is possible --><br />
| status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) --><br />
| status_accel = <!-- The sensor that measures proper acceleration works --><br />
| status_audio = <!-- Using the device's speakers/headphone jack works --><br />
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol --><br />
| status_camera = <!-- Taking photos and videos works. --><br />
| status_gps = <!-- The Global Positioning System sensor works. --><br />
| status_mobiledata = <!-- Connecting to the Internet via cellular network. --><br />
| status_sms = <!-- Sending and receiving short messages works as intended. --><br />
| status_calls = <!-- Talking to other people over the cellular network. --><br />
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" --><br />
| booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* --><br />
<br />
<!-- you can also use these lines if you need to: --><br />
| pmoskernel = 3.10.61<br />
<!-- see Unixbench page on wiki --><br />
| whet_dhry = 3096.2<br />
<!-- Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* [[user:Aleksas|Aleksas]]<br />
* [[user:St.S|St.S]]<br />
<br />
== Maintainer(s) ==<br />
<!-- Only if this device doesn't run on linux-postmarketos yet! --><br />
<!-- This person needs to be willing to answer questions from users of this device --><br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<!-- autogenerated, use {{Owns device|devicepage|notes}} on your profile page --><br />
<!-- use _ instead of spaces in device page name, e.g. {{Owns device|HTC_Desire_(htc-bravo)|custom notes}}--><br />
<!-- you may need to purge page cache to see changes (more->purge cache)--><br />
<!-- you can use {{My devices}} on your profile page to show table with all your devices --><br />
<br />
== What works ==<br />
* Xfce4, Mate, Sxmo user interfaces<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery zip]] and flash it with TWRP.<br />
<!-- add more sections below as necessary, e.g. WiFi, photos, ... --><br />
<br />
== See also ==<br />
* [https://www.gsmarena.com/samsung_galaxy_s6_edge-7079.php Smartphone specifications]<br />
* [https://wiki.lineageos.org/devices/zeroltexx Device info (LineageOS)]<br />
* [https://twrp.me/samsung/samsunggalaxys6edge.html TWRP for Samsung Galaxy S6 Edge]<br />
* [https://github.com/jcadduono/nethunter_kernel_noblelte/tree/twrp-6.0 Kernel used (TWRP's kernel)]<br />
* [https://gitlab.com/postmarketOS/pmaports/-/merge_requests/2105 Newer port, using different kernel]<br />
<!--<br />
Link to related GitLab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):<br />
* {{MR|CHANGEME|pmaports}} Initial merge request<br />
* {{issue|CHANGEME|pmaports}} Some related issue<br />
You can also add normal web links:<br />
* [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]<br />
--><br />
<!--<br />
If you manage to get your device packages merged, uncomment links below.<br />
* {{Device package|samsung-zeroltexx}}<br />
* {{Kernel package|samsung-zeroltexx}}<br />
--></div>
St.S
https://wiki.postmarketos.org/index.php?title=User:St.S&diff=18596
User:St.S
2021-04-13T20:05:19Z
<p>St.S: added contact data</p>
<hr />
<div><div style="float: right;"><br />
{{User main device|Samsung Galaxy S6 edge (samsung-zeroltexx)}}<br />
{{User GitLab|st.s}}<br />
</div><br />
<br />
Matrix: @st.s:matrix.org<br />
<br />
GitLab: https://gitlab.com/st.s<br />
<br />
== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx)|booting w/USB,ssh access,display,touch}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)&diff=18485
Samsung Galaxy S6 Edge (samsung-zeroltexx)
2021-04-09T00:14:40Z
<p>St.S: /* See also */Add link to current merge request with my port for the S6 edge.</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6 Edge<br />
| codename = samsung-zeroltexx<br />
| image = File:samsung-zeroltexx.jpg<br />
| imagecaption = Samsung Galaxy S6 Edge<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0-7.0<br />
| chipset = Exynos 7420 Octa<br />
| cpu = Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760MP8<br />
| storage = 32/64/128 GB<br />
| display = 1440 x 2560 Super AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --><br />
| status_usbnet = P<br />
| status_flashing = <br />
| status_touch = Y<br />
| status_screen = Y<br />
| status_wifi = <br />
| status_xwayland = N<br />
| status_fde = <br />
| status_mainline = <br />
| status_battery = <!-- Charging the battery with charging-sdl is possible --><br />
| status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) --><br />
| status_accel = <!-- The sensor that measures proper acceleration works --><br />
| status_audio = <!-- Using the device's speakers/headphone jack works --><br />
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol --><br />
| status_camera = <!-- Taking photos and videos works. --><br />
| status_gps = <!-- The Global Positioning System sensor works. --><br />
| status_mobiledata = <!-- Connecting to the Internet via cellular network. --><br />
| status_sms = <!-- Sending and receiving short messages works as intended. --><br />
| status_calls = <!-- Talking to other people over the cellular network. --><br />
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" --><br />
| booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* --><br />
<br />
<!-- you can also use these lines if you need to: --><br />
| pmoskernel = 3.10.61<br />
<!-- see Unixbench page on wiki --><br />
| whet_dhry = 3096.2<br />
<!-- Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* [[user:Aleksas|Aleksas]]<br />
<br />
== Maintainer(s) ==<br />
<!-- Only if this device doesn't run on linux-postmarketos yet! --><br />
<!-- This person needs to be willing to answer questions from users of this device --><br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<!-- autogenerated, use {{Owns device|devicepage|notes}} on your profile page --><br />
<!-- use _ instead of spaces in device page name, e.g. {{Owns device|HTC_Desire_(htc-bravo)|custom notes}}--><br />
<!-- you may need to purge page cache to see changes (more->purge cache)--><br />
<!-- you can use {{My devices}} on your profile page to show table with all your devices --><br />
<br />
== What works ==<br />
* Xfce4, Mate, Sxmo user interfaces<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery zip]] and flash it with TWRP.<br />
<!-- add more sections below as necessary, e.g. WiFi, photos, ... --><br />
<br />
== See also ==<br />
* [https://www.gsmarena.com/samsung_galaxy_s6_edge-7079.php Smartphone specifications]<br />
* [https://wiki.lineageos.org/devices/zeroltexx Device info (LineageOS)]<br />
* [https://twrp.me/samsung/samsunggalaxys6edge.html TWRP for Samsung Galaxy S6 Edge]<br />
* [https://github.com/jcadduono/nethunter_kernel_noblelte/tree/twrp-6.0 Kernel used (TWRP's kernel)]<br />
* [https://gitlab.com/postmarketOS/pmaports/-/merge_requests/2105 Newer port, using different kernel]<br />
<!--<br />
Link to related GitLab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):<br />
* {{MR|CHANGEME|pmaports}} Initial merge request<br />
* {{issue|CHANGEME|pmaports}} Some related issue<br />
You can also add normal web links:<br />
* [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]<br />
--><br />
<!--<br />
If you manage to get your device packages merged, uncomment links below.<br />
* {{Device package|samsung-zeroltexx}}<br />
* {{Kernel package|samsung-zeroltexx}}<br />
--></div>
St.S
https://wiki.postmarketos.org/index.php?title=User:St.S&diff=16391
User:St.S
2021-01-10T20:51:01Z
<p>St.S: </p>
<hr />
<div>== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx)|booting w/USB,ssh access,display,touch}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_(samsung-zerofltexx)&diff=16390
Samsung Galaxy S6 (samsung-zerofltexx)
2021-01-10T20:50:31Z
<p>St.S: Added info about my (seemingly more successful) porting attempt.</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6<br />
| codename = samsung-zerofltexx<br />
| image = File:samsung-zerofltexx.jpg<br />
| imagecaption = Samsung Galaxy S6<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0 - 8.0<br />
| pmoskernel = 3.10.101<br />
| chipset = Exynos 7420 Octa<br />
| cpu = Octa-core (4x 2.1 GHz Cortex-A57 & 4x 1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760 MP8<br />
| storage = 32,64,128 GB<br />
| display = 1440x2560 AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
| status_usbnet = Y<br />
| status_flashing =<br />
| status_touch = Y<br />
| status_screen = Y<br />
| status_wifi =<br />
| status_xwayland =<br />
| status_fde =<br />
| status_mainline =<br />
| status_battery =<br />
| status_3d =<br />
| status_accel =<br />
| status_audio =<br />
| status_bluetooth =<br />
| status_camera =<br />
| status_gps =<br />
| status_mobiledata =<br />
| status_sms =<br />
| status_calls =<br />
| status =<br />
| booting = yes<br />
<!-- you can also use these lines if you need to:<br />
Version of the kernel that pmos is running<br />
| pmoskernel = 3.10.108<br />
see Unixbench page on wiki<br />
| whet_dhry = 0.0<br />
Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* techfreak<br />
* St.S<br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<br />
== How to enter flash mode ==<br />
Volume Down 🔈, Home + Power<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery.zip]] and flash it with TWRP. Make sure that in TWRP you unmounted the partition you want to flash on by default that would be "SYSTEM".<br />
<br />
== See also ==<br />
* [https://wiki.lineageos.org/devices/zerofltexx Device info (LineageOS)]<br />
* [https://github.com/enesuzun2002/android_kernel_samsung_exynos7420 Kernel used]<br />
* [https://github.com/Exynos7420/android_kernel_samsung_exynos7420 Kernel used in second porting attempt by St.S]</div>
St.S
https://wiki.postmarketos.org/index.php?title=User:Aleksas&diff=16380
User:Aleksas
2021-01-10T12:14:27Z
<p>St.S: Undo revision 16378 by St.S (talk) sorry, edited wrong page!</p>
<hr />
<div>== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=User:St.S&diff=16379
User:St.S
2021-01-10T12:13:45Z
<p>St.S: Created page with "== Owns devices == {{My devices}} {{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx|booting w/USB,ssh access)}} {{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|}}"</p>
<hr />
<div>== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx|booting w/USB,ssh access)}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=User:Aleksas&diff=16378
User:Aleksas
2021-01-10T12:13:04Z
<p>St.S: /* Owns devices */</p>
<hr />
<div>== Owns devices ==<br />
<br />
{{My devices}}<br />
{{Owns device|Samsung_Galaxy_S6_(samsung-zerofltexx|booting w/USB,ssh access)}}<br />
{{Owns device|Samsung_Galaxy_S6_Edge_(samsung-zeroltexx)|}}</div>
St.S
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_(samsung-zerofltexx)&diff=16377
Samsung Galaxy S6 (samsung-zerofltexx)
2021-01-10T12:08:12Z
<p>St.S: /* Contributors */</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6<br />
| codename = samsung-zerofltexx<br />
| image = File:samsung-zerofltexx.jpg<br />
| imagecaption = Samsung Galaxy S6<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0 - 8.0<br />
| pmoskernel = 3.10.101<br />
| chipset = Exynos 7420 Octa<br />
| cpu = Octa-core (4x 2.1 GHz Cortex-A57 & 4x 1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760 MP8<br />
| storage = 32,64,128 GB<br />
| display = 1440x2560 AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
| status_usbnet = N<br />
| status_flashing =<br />
| status_touch =<br />
| status_screen =<br />
| status_wifi =<br />
| status_xwayland =<br />
| status_fde =<br />
| status_mainline =<br />
| status_battery =<br />
| status_3d =<br />
| status_accel =<br />
| status_audio =<br />
| status_bluetooth =<br />
| status_camera =<br />
| status_gps =<br />
| status_mobiledata =<br />
| status_sms =<br />
| status_calls =<br />
| status =<br />
| booting = no<br />
<!-- you can also use these lines if you need to:<br />
Version of the kernel that pmos is running<br />
| pmoskernel = 3.x.x<br />
see Unixbench page on wiki<br />
| whet_dhry = 0.0<br />
Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* techfreak<br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<br />
== How to enter flash mode ==<br />
Volume Down 🔈, Home + Power<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery.zip]] and flash it with TWRP. Make sure that in TWRP you unmounted the partition you want to flash on by default that would be "SYSTEM".<br />
<br />
== See also ==<br />
* [https://wiki.lineageos.org/devices/zerofltexx Device info (LineageOS)]<br />
* [https://github.com/enesuzun2002/android_kernel_samsung_exynos7420 Kernel used]</div>
St.S
https://wiki.postmarketos.org/index.php?title=Samsung_Galaxy_S6_(samsung-zerofltexx)&diff=16376
Samsung Galaxy S6 (samsung-zerofltexx)
2021-01-10T12:06:48Z
<p>St.S: /* Contributors */</p>
<hr />
<div>{{Infobox device<br />
| manufacturer = Samsung<br />
| name = Galaxy S6<br />
| codename = samsung-zerofltexx<br />
| image = File:samsung-zerofltexx.jpg<br />
| imagecaption = Samsung Galaxy S6<br />
| releaseyear = 2015<br />
| originalsoftware = Android 5.0 - 8.0<br />
| pmoskernel = 3.10.101<br />
| chipset = Exynos 7420 Octa<br />
| cpu = Octa-core (4x 2.1 GHz Cortex-A57 & 4x 1.5 GHz Cortex-A53)<br />
| gpu = Mali-T760 MP8<br />
| storage = 32,64,128 GB<br />
| display = 1440x2560 AMOLED<br />
| memory = 3 GB<br />
| architecture = aarch64<br />
| status_usbnet = N<br />
| status_flashing =<br />
| status_touch =<br />
| status_screen =<br />
| status_wifi =<br />
| status_xwayland =<br />
| status_fde =<br />
| status_mainline =<br />
| status_battery =<br />
| status_3d =<br />
| status_accel =<br />
| status_audio =<br />
| status_bluetooth =<br />
| status_camera =<br />
| status_gps =<br />
| status_mobiledata =<br />
| status_sms =<br />
| status_calls =<br />
| status =<br />
| booting = no<br />
<!-- you can also use these lines if you need to:<br />
Version of the kernel that pmos is running<br />
| pmoskernel = 3.x.x<br />
see Unixbench page on wiki<br />
| whet_dhry = 0.0<br />
Is OTG available, not used in wiki<br />
| status_otg = -<br />
--><br />
}}<br />
<br />
== Contributors ==<br />
* techfreak<br />
* St.S<br />
<br />
== Users owning this device ==<br />
{{Device owners}}<br />
<br />
== How to enter flash mode ==<br />
Volume Down 🔈, Home + Power<br />
<br />
== Installation ==<br />
Create a [[Android_Recovery_Zip_Installation|recovery.zip]] and flash it with TWRP. Make sure that in TWRP you unmounted the partition you want to flash on by default that would be "SYSTEM".<br />
<br />
== See also ==<br />
* [https://wiki.lineageos.org/devices/zerofltexx Device info (LineageOS)]<br />
* [https://github.com/enesuzun2002/android_kernel_samsung_exynos7420 Kernel used]</div>
St.S