|
|
(6 intermediate revisions by 3 users not shown) |
Line 1: |
Line 1: |
| {{Infobox device
| | #REDIRECT [[ODROID_N2%2B_(odroid-n2plus)]] |
| | manufacturer = ODROID
| |
| | name = N2+
| |
| | codename = odroid-n2plus
| |
| | image = File:CHANGE_ME_TO_DEVICE_CODENAME.jpg
| |
| | imagecaption = odroid-n2plus runs postmarketOS
| |
| | releaseyear = 2020
| |
| | originalsoftware = Ubuntu 20.04 or Android Pie
| |
| | chipset = Amlogic S922X 12nm
| |
| | cpu = Quad-core Cortex-A73 @ 1.8GHz and Dual-core Cortex-A53 @ 1.9GHz
| |
| | gpu = Mali-G52 GPU with 6x Execution Engines @ 800MHz
| |
| | storage = eMMC connector (8/16/32/64/128GB) and microSD slot (DS/HS modes up to UHS-I SDR104)
| |
| | display = none, but HDMI 2.0 connector up to 4K@60Hz with HDR,CEC,EDID
| |
| | memory = 4GB DDR4 with 32bit bus width, 2640 MT/s data rate (PC4-21333 grade), 1.2V low power design
| |
| | architecture = aarch64
| |
| <!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) -->
| |
| | status_usbnet = -<!-- USB networking does work? then put Y here and delete this comment -->
| |
| | status_flashing = -<!-- Flashing with "pmbootstrap flasher" works? Put Y here. It works the same for everything coming below. -->
| |
| | status_touch = -
| |
| | status_screen = Y
| |
| | status_wifi = -
| |
| | status_xwayland = -<!-- Showing X11 applications in a Wayland compositor (Weston, KWin, ...) works? -->
| |
| | status_fde = -<!-- When installing with full disk encryption, can you type in the password with the on screen keyboard? -->
| |
| | status_mainline = Y
| |
| | status_battery = -
| |
| | status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) -->
| |
| | status_accel = -<!-- The sensor that measures proper acceleration works -->
| |
| | status_audio = -<!-- Using the device's speakers/headphone jack works -->
| |
| | status_bluetooth = -<!-- It's possible to pair and use other devices via the bluetooth protocol -->
| |
| | status_camera = -
| |
| | status_gps = -
| |
| | status_mobiledata = -
| |
| | status_sms = -
| |
| | status_calls = -
| |
| | status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" -->
| |
| | status_otg = -<!-- USB-OTG adapters work, e.g. to connect an USB flash drive to the device -->
| |
| | status_nfc = -
| |
| | booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* -->
| |
| | pmoskernel = 5.14.3
| |
| | whet_dhry = 4142.2
| |
| }}
| |
| | |
| == Contributors ==
| |
| * k-laus
| |
| | |
| == Users owning this device ==
| |
| * k-laus
| |
| {{Device owners}}
| |
| <!-- autogenerated, use {{Owns device|devicepage|notes}} on your profile page -->
| |
| <!-- use _ instead of spaces in device page name, e.g. {{Owns device|HTC_Desire_(htc-bravo)|custom notes}}-->
| |
| <!-- you may need to purge page cache to see changes (more->purge cache)-->
| |
| <!-- you can use {{My devices}} on your profile page to show table with all your devices -->
| |
| | |
| == How to enter flash mode ==
| |
| | |
| == Installation ==
| |
| Preparation
| |
| The device uses u-boot with petitboot loader loaded in spi memory.
| |
| Installation to eMMC was tested:
| |
| pmbootstrap build linux-odroid-n2plus
| |
| pmbootstrap build device-odroid-n2plus
| |
| Put an eMMC card into eMMC-to-USB3 reader, assumption is it appears as /dev/sdX (replace sdX with correct devicename below), and install to it:
| |
| pmbootstrap install --sdcard /dev/sdX
| |
| Afterwards, still this '''manual''' step is needed to create u-boot compatible initramfs:
| |
| mount /dev/sdX1 /mnt/boot && \
| |
| cd /mnt/boot && \
| |
| mkimage -A arm64 -T ramdisk -C none -n initramfs -d initramfs initramfs.uimg
| |
| | |
| == See also ==
| |
| odroid-n2plus branch - https://gitlab.com/k-laus/pmaports/-/commit/5fff9e5aaa20be0756af4fb27ba4cbc6cf09c94a
| |
| <!--
| |
| Link to related GitLab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):
| |
| * {{MR|CHANGEME|pmaports}} Initial merge request
| |
| * {{issue|CHANGEME|pmaports}} Some related issue
| |
| You can also add normal web links:
| |
| * [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]
| |
| -->
| |
| <!--
| |
| If you manage to get your device packages merged, uncomment links below and change DEVICE_CODENAME with the actual one.
| |
| * {{Device package|DEVICE_CODENAME}}
| |
| * {{Kernel package|DEVICE_CODENAME}}
| |
| -->
| |