Jump to content

JingPad A1 (jingpad-a1): Difference between revisions

From postmarketOS Wiki
Clevrpwn (talk | contribs)
m rollbackEdits.php mass rollback
Tag: Rollback
 
(6 intermediate revisions by 4 users not shown)
Line 6: Line 6:
| imagecaption = JingPad A1
| imagecaption = JingPad A1
| releaseyear = 2021
| releaseyear = 2021
| originalsoftware = JingOS (Linux 4.14)
| originalsoftware = JingOS
| originalversion = Linux 4.14
| orginalkernel = 4.14
| chipset = Unisoc Tiger T7510
| chipset = Unisoc Tiger T7510
| cpu = 2.0 GHz ARM Cortex-A75
| cpu = 2x2.0 GHz ARM Cortex-A75, 6x1.8 GHz ARM Cortex-A55
| gpu = PowerVR GM 9446
| gpu = PowerVR GM 9446
| storage = 128 GB / 256 GB
| storage = 128 GB / 256 GB
Line 40: Line 42:


<!-- you can also use these lines if you need to:
<!-- you can also use these lines if you need to:
if the device haven't originally ran Android OS, e.g. Nokia N900
| n-android =  ✔
Version of the kernel that pmos is running
Version of the kernel that pmos is running
| pmoskernel = 4.x.x
| pmoskernel = 4.x.x

Latest revision as of 14:33, 23 April 2023

This device is marked as not booting.
Jingling JingPad A1
JingPad A1
JingPad A1
Manufacturer Jingling
Name JingPad A1
Codename jingpad-a1
Released 2021
Hardware
Chipset Unisoc Tiger T7510
CPU 2x2.0 GHz ARM Cortex-A75, 6x1.8 GHz ARM Cortex-A55
GPU PowerVR GM 9446
Display 2368x1728 AMOLED
Storage 128 GB / 256 GB
Memory 8 GB
Architecture aarch64
Software
Original software JingOS
Original version Linux 4.14
postmarketOS
Category testing
Pre-built images no
Unixbench Whet/Dhry score 6620.0


Contributors

  • R
  • Clevrpwn

Users owning this device

  • Clevrpwn (Notes: For pmOS development)
  • Shiishii (Notes: Daily driver Tab Ubuntu Touch)


How to enter flash mode

Recovery

  • Turn off your device;
  • Press Power button and after 1 second press also “Volume Down”;
  • Hold both till JingPad logo appears;
  • After the JingPad logo appears, release “Power” & “Volume-”
  • Welcome to Recovery!

Fastboot Mode

  • Turn off your device
  • Boot JingPad A1 into recovery mode;
  • Choose “Reboot into bootloader.”
  • After booting into bootloader mode, connect your device to a Linux desktop using the original USB Cable;
  • Open Terminal in the SDK location, check your device is connected with:
 sudo ./fastboot devices

Installation

See also