Xiaomi Mi Note 2 (xiaomi-scorpio): Difference between revisions
Appearance
updated 3D acceleration status |
updated accelerometer status |
||
Line 25: | Line 25: | ||
| status_battery = <!-- Charging the battery with charging-sdl is possible --> | | status_battery = <!-- Charging the battery with charging-sdl is possible --> | ||
| status_3d = N <!-- Hardware accelerated 3D graphics (e.g. with freedreno) --> | | status_3d = N <!-- Hardware accelerated 3D graphics (e.g. with freedreno) --> | ||
| status_accel = <!-- The sensor that measures proper acceleration works --> | | status_accel = N <!-- The sensor that measures proper acceleration works --> | ||
| status_audio = <!-- Using the device's speakers/headphone jack works --> | | status_audio = <!-- Using the device's speakers/headphone jack works --> | ||
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol --> | | status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol --> |
Revision as of 11:35, 13 September 2020
![]() Xiaomi Mi Note 2 running Weston | |
Manufacturer | Xiaomi |
---|---|
Name | Mi Note 2 |
Codename | xiaomi-scorpio |
Released | 2016 |
Hardware | |
Chipset | Qualcomm MSM8996Pro Snapdragon 821 |
CPU |
Quad-core (2x2.35 GHz Kryo 2x1.6 GHz Kryo) |
GPU | Adreno 530 |
Display | 1080x1920 AMOLED |
Storage | 64/128 GB UFS 2.0 |
Memory | 4/6 GB |
Architecture | aarch64 |
Software | |
Original software | Android 6.0 (Marshmallow), MIUI 8.2 - Upgradeable to Android 8.0 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
Works |
---|---|
USB Networking |
Broken |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Broken |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
Broken |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- Tooniis
Maintainer(s)
- Tooniis
Users owning this device
How to enter flash mode
Hold Power + Volume Down while the phone is turned off. This will make the phone boot into fastboot mode
Installation
You will need to unlock the bootloader in order to be able to flash anything onto the phone.
Installing TWRP before doing anything else is recommended, as it makes dealing with the phone easier later on, and allows for quick restoration by taking backups of /system
and /boot
, then flashing them back in order to restore the device to its original state.
Mainline
Does not boot yet. Temporary fork of linux-postmarketos-qcom-msm8996, will open merge request when device boots.
See also
- pmaports#708 Mainlining attempt