Jump to content

LeapFrog Leapster GS (leapfrog-lucy): Difference between revisions

From postmarketOS Wiki
Furret (talk | contribs)
No edit summary
Ungeskriptet (talk | contribs)
Keep factual, fix vendor in codename
Tags: mobile edit mobile web edit
Line 1: Line 1:
{{Infobox device
{{Infobox device
| manufacturer = LeapFrog<!-- e.g. HTC -->
| manufacturer = LeapFrog
| name = LeapsterGS <!-- e.g. Desire -->
| name = LeapsterGS
| codename = lf-leapstergs <!-- e.g. htc-bravo -->
| codename = leapfrog-leapstergs
| image = File:lf-leapstergs.jpg
| image = File:lf-leapstergs.jpg
| imagecaption = CHANGE_ME
| imagecaption =
| releaseyear = 2012
| releaseyear = 2012
| category = testing
| category = testing
| originalsoftware = custom Ångstrom based Linux distro <!-- e.g. Android -->
| originalsoftware = custom Ångstrom based Linux distro
| originalversion = 2.6.37 <!-- e.g. 11 for Android 11 -->
| originalversion = 2.6.37
| pmoskernel = 3.4.24 <!-- Version of the kernel that postmarketOS is running -->
| pmoskernel = 3.4.24
| chipset = Nexell NXP3200 <!-- e.g. Qualcomm Snapdragon S1 (QSD8250) - see "Chipset names" section in Help:Device Page -->
| chipset = Nexell NXP3200 <!-- e.g. Qualcomm Snapdragon S1 (QSD8250) - see "Chipset names" section in Help:Device Page -->
| cpu = 550 MHz Cortex-A9 <!-- e.g. 1.0 GHz Scorpion -->
| cpu = 550 MHz Cortex-A9 <!-- e.g. 1.0 GHz Scorpion -->
Line 15: Line 15:
| display = 320x240 TFT <!-- e.g. 480x800 AMOLED -->
| display = 320x240 TFT <!-- e.g. 480x800 AMOLED -->
| storage = 2 GB <!-- e.g. 512 MB -->
| storage = 2 GB <!-- e.g. 512 MB -->
| memory = 128 MB (lower than N900!) <!-- e.g. 576 MB -->
| memory = 128 MB
| architecture = armv7 <!-- One of these: armhf, armv7, aarch64, riscv64, x86, x86_64 -->
| architecture = armv7 <!-- One of these: armhf, armv7, aarch64, riscv64, x86, x86_64 -->
| type = handset (console handheld thing) <!-- e.g. handset, tablet -->
| type = handset (console handheld thing) <!-- e.g. handset, tablet -->
| whet_dhry = ? <!-- see Unixbench page on wiki -->
| whet_dhry =
<!-- Features -->
<!-- Features -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->
Line 32: Line 32:
| status_3d = Y <!-- Hardware accelerated 3D graphics (e.g. with freedreno) -->
| status_3d = Y <!-- Hardware accelerated 3D graphics (e.g. with freedreno) -->
| status_audio = Y <!-- Using the device's speakers/headphone jack works -->
| status_audio = Y <!-- Using the device's speakers/headphone jack works -->
| status_bluetooth = - <!-- It's possible to pair and use other devices via the bluetooth protocol -->
| status_bluetooth = -
| status_camera = P <!-- Taking photos and videos works. -->
| status_camera = P <!-- Taking photos and videos works. -->
| status_gps = - <!-- The Global Positioning System sensor works.  -->
| status_gps = - <!-- The Global Positioning System sensor works.  -->

Revision as of 05:36, 7 September 2023

This device is marked as not booting.
Status: Yet to start work on
LeapFrog LeapsterGS
Manufacturer LeapFrog
Name LeapsterGS
Codename leapfrog-leapstergs
Released 2012
Type handset (console handheld thing)
Hardware
Chipset Nexell NXP3200
CPU 550 MHz Cortex-A9
GPU CHANGE_ME
Display 320x240 TFT
Storage 2 GB
Memory 128 MB
Architecture armv7
Software
Original software custom Ångstrom based Linux distro
Original version 2.6.37
FOSS bootloader no
postmarketOS
Category testing
Pre-built images no
Mainline no
postmarketOS kernel 3.4.24


Contributors

Furret

Users owning this device

  • DCFUKSURMOM (Notes: Running RetroLeap, I've actually worked on the RetroLeap project and have 2 custom kernels on my github.)


How to enter flash mode

Installation

Use pmbootstrap to build your own installation image.

$ pmbootstrap init
$ pmbootstrap install


See also