Samsung Galaxy Watch (samsung-galileo): Difference between revisions
Appearance
Zephyr1112 (talk | contribs) update unbricking process |
Zephyr1112 (talk | contribs) mNo edit summary |
||
Line 73: | Line 73: | ||
<!-- you can use {{My devices}} on your profile page to show table with all your devices --> | <!-- you can use {{My devices}} on your profile page to show table with all your devices --> | ||
== Before You Begin == | |||
{{warning|Do not try to port or flash postmarketOS on the Watch if you don't have access to unbricking tools. You have been warned!}} | {{warning|Do not try to port or flash postmarketOS on the Watch if you don't have access to unbricking tools. You have been warned!}} | ||
* Familiarize yourself with the [https://akersys.com/posts/unbrick-galaxy-watch-over-usb/ Unbricking Process] (thanks to Arminas Keršys!) | * Familiarize yourself with the [https://akersys.com/posts/unbrick-galaxy-watch-over-usb/ Unbricking Process] (thanks to Arminas Keršys!) | ||
* You will need a USB jig with the following pinout in case you brick: | * You will need a USB jig with the following pinout in case you brick: |
Latest revision as of 12:52, 9 November 2024
This device is marked as not booting.
Status: You will end up with a hardbrick.
Status: You will end up with a hardbrick.
Galaxy Watch 42mm SM-R810 Galaxy Watch 42mm SM-R810 | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Watch (SM-R800, SM-R805, SM-R810, SM-R815) |
Codename | samsung-galileo |
Released | 2018 |
Type | watch |
Hardware | |
Chipset | Samsung Exynos 9110 |
CPU | Dual-core 1.15 GHz Cortex-A53 |
GPU | Mali-T720 |
Display | 360x360 Super AMOLED |
Storage | 4 GB |
Memory | 768 MB, 1.5 GB |
Architecture | aarch64 |
Software | |
Original software | Tizen |
Original version | 4.0 |
Extended version | 5.5 (OneUI 2.0) |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | 4.9.59 |
Contributors
Maintainer(s)
Users owning this device
- Zephyr1112 (Notes: 42mm NON-LTE model (SM-R810). Hardbricked after flashing PMOS, stuck on WIRED Odin.)
Before You Begin
WARNING: Do not try to port or flash postmarketOS on the Watch if you don't have access to unbricking tools. You have been warned! |
- Familiarize yourself with the Unbricking Process (thanks to Arminas Keršys!)
- You will need a USB jig with the following pinout in case you brick:
Status
Port doesn't boot at all, reboots to ODIN Mode. (Tested on SM-R810)
- After booting, most of the options in recovery mode are gone (Only Continue, Power off and Download (wireless) available)
Flash Modes
How to enter advanced reboot
- Power on the watch
- Hold the Power/Home button until the screen turns black
- Once you see "Rebooting..." on the screen, press Power/Home multiple times.
- On the menu you can now move by single pressing and select by holding Power/Home.
Available options
- Continue - will proceed with reboot
- Power off - shut down the watch
- Download (wireless) - NetOdin 3 flash mode. Use Home button to cycle between WPS and AP mode
- Upload (wireless) - ??? (wireless)
Tizen 4.0.x.x / Engineering firmware exclusive
- Download - Wired download (no visible data connection, dock does not support data transfer?)
- Upload - ??? (but wired)
Installation
Not yet.
Notes
- This device uses the same dzImage structure as other Tizen devices. See Samsung Z1 for more info.
- Apparently, the generic tizen_galileo_defconfig config has no display panel set by default. One has to use tizen_galileo_small/_large_defconfig or build will fail with panel and MIPI-related unused variables. User will have to choose which panel to use at build, like on the Xiaomi Poco F1 (one can NOT enable both panel variants at the same time, or the source will freak out)
Kernel Compilation Issues
- If using GCC 10 or newer, dtc-parser and dtc-lexer will fail due to -fno-common. This commit fixes it.
- NONE! Kernel builds properly.
Kernel Configs
- tizen_galileo_lte_defconfig - (USE ALONG WITH GALILEO-GENERIC AND 42MM/46MM CONFIGS) enables LTE functionality
- tizen_galileo_large_defconfig - (USE ALONG WITH GALILEO-GENERIC) enables display panel for 46mm variant
- tizen_galileo_small_defconfig - (USE ALONG WITH GALILEO-GENERIC) enables display panel for 42mm variant
- tizen_galileo_defconfig - TIZEN galileo-generic (USE AS BASE FOR ALL VARIANTS)
Notes
Samsung has not released SM-800 / SM-R805 (46mm / 46mm LTE) specific sources. Defconfig for them can be found in the SM-R810 / SM-815 (42mm, 42mm LTE) sources.