Jump to content

WEXLER Tab 7t (wexler-qc750): Difference between revisions

From postmarketOS Wiki
change kernel since previous one was a fork, which was more abandoned than this
tested compilation with gcc6
Line 60: Line 60:


== See also ==
== See also ==
* Using this old 3.1.10 kernel, built with '''gcc4''': https://github.com/DmitryADP/morpheus_kernel_wexler_qc750
* Using this old 3.1.10 kernel, built with '''gcc6''': https://github.com/DmitryADP/morpheus_kernel_wexler_qc750
* [https://wiki.postmarketos.org/wiki/Nvidia_Tegra_3_(tegra30) This SoC has mainline support]
* [https://wiki.postmarketos.org/wiki/Nvidia_Tegra_3_(tegra30) This SoC has mainline support]
<!--
<!--

Revision as of 08:11, 20 November 2020

This device is marked as not booting.
Status: Kernel compiles, device boots, testing capabilities
WEXLER Tab 7t
Booted tablet, with weston
Booted tablet, with weston
Manufacturer WEXLER
Name Tab 7t
Codename wexler-qc750
Released 2012
Hardware
Chipset NVIDIA Tegra 3
CPU NVIDIA T30L Quad-core Cortex-A9 1.3 ГГц
GPU NVIDIA ULP GeForce GPU 12 cores
Display 1280x800 IPS
Storage eMMC 8 GB
Memory 1024 MB DDR3L
Architecture armv7
Software
Original software Android 4.2.2
postmarketOS
Category testing
Pre-built images no
postmarketOS kernel 3.1.10


Notes

  • Device SoC should be similar to SoC in Google Nexus 7 2012 and Google Nexus 7 2012 GSM
  • OTG available - partially (full USB port, working only when device connected before booting)
  • Device have 3G modem (not working?)
  • MiniHDMI port available (not working?)

Contributors

Maintainer(s)

Users owning this device

  • DragonX256 (Notes: Tegra 3 tablet, close to mainline kernel)
  • Shipa (Notes: all clips are broken, a bit quirky)


How to enter flash mode

Press Volume Up + Power keys, with Volume Down move selection to Fastboot Protocol, then choose it by pressing Volume Up.

Installation

Later...

See also