Samsung Galaxy A3 2017 (samsung-a3y17lte): Difference between revisions
Appearance
mNo edit summary |
Fixed USB net and display colors |
||
Line 16: | Line 16: | ||
| pmoskernel = 3.18.14 | | pmoskernel = 3.18.14 | ||
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | <!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | ||
| status_usbnet = | | status_usbnet = Y | ||
| status_flashing = N | | status_flashing = N | ||
| status_touch = Y | | status_touch = Y | ||
| status_screen = | | status_screen = Y | ||
| status_wifi = <!-- Wireless network works? --> | | status_wifi = <!-- Wireless network works? --> | ||
| status_xwayland = Y | | status_xwayland = Y |
Revision as of 11:15, 4 December 2020
Samsung Galaxy A3 Samsung Galaxy A3 | |
Manufacturer | Samsung |
---|---|
Name | Galaxy A3 (2017) |
Codename | samsung-a3y17lte |
Released | 2017 |
Hardware | |
Chipset | Exynos 7870 |
CPU | 8x 1.6 GHz Cortex-A53 |
GPU | Mali-T830 MP1 |
Display | 720x1280 Super AMOLED |
Storage | 16 GB |
Memory | 2 GB |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android 6.0.1 - 8.0 |
Extended version The most recent supported version from the manufacturer. |
Android 6.0.1 - 8.0 |
postmarketOS | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
3.18.14 |
Device package |
![]() |
Kernel package |
![]() |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Broken
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Charging and battery level reporting works |
Untested
|
Screen Display works. Ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Contributors
- mimi89999
Maintainer(s)
Users owning this device
How to enter flash mode
When the device is fully powered off, hold Power, Volume Down and Home for a few seconds.
A (turquoise) download mode warning screen should appear, press Volume Up to confirm.
Installation
It is recommended to sideload an android recovery zip through TWRP for the easiest process, since heimdall freaks out about the subpartitions in SYSTEM and won't move past ~7%.
$ pmbootstrap install --android-recovery-zip
$ pmbootstrap flasher --method=adb sideload
See also
- pmaports!1784 Initial merge request