Samsung Galaxy Grand Prime Plus (samsung-grandpplte): Difference between revisions
Appearance
Fix some specs |
|||
Line 8: | Line 8: | ||
| originalsoftware = Android 6.0.1 <!-- e.g. Android 2.1 --> | | originalsoftware = Android 6.0.1 <!-- e.g. Android 2.1 --> | ||
| chipset = MediaTek MT6737T <!-- e.g. Qualcomm QSD8250 Snapdragon S1 --> | | chipset = MediaTek MT6737T <!-- e.g. Qualcomm QSD8250 Snapdragon S1 --> | ||
| cpu = 4x 1. | | cpu = 4x 1.44 GHz Cortex-A53 <!-- e.g. 1.0 GHz Scorpion --> | ||
| gpu = | | gpu = MaliT720-MP2 <!-- e.g. Adreno 200 --> | ||
| storage = 8 GB <!-- e.g. 512 MB --> | | storage = 8 GB <!-- e.g. 512 MB --> | ||
| display = | | display = 540x960 LCD <!-- e.g. 480x800 AMOLED --> | ||
| memory = 1.5 GB <!-- e.g. 576 MB --> | | memory = 1.5 GB <!-- e.g. 576 MB --> | ||
| architecture = armv7 (CPU is aarch64, but OEM software is armv7) <!-- One of these: armhf, armv7, aarch64, x86, x86_64 --> | | architecture = armv7 (CPU is aarch64, but OEM software is armv7) <!-- One of these: armhf, armv7, aarch64, x86, x86_64 --> |
Revision as of 05:50, 1 March 2021
WARNING: This device cannot run postmarketOS, as its architecture is unsupported. |
This device is marked as not booting.
![]() Grand Prime+ running stock Android | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Grand Prime+ |
Codename | samsung-grandpplte |
Released | 2016 |
Hardware | |
Chipset | MediaTek MT6737T |
CPU | 4x 1.44 GHz Cortex-A53 |
GPU | MaliT720-MP2 |
Display | 540x960 LCD |
Storage | 8 GB |
Memory | 1.5 GB |
Architecture | armv7 (cpu is aarch64, but oem software is armv7) |
Software | |
Original software | Android 6.0.1 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Contributors
- Tooniis
Maintainer(s)
Users owning this device
- Tooniis (Notes: SM-G532F)
How to enter flash mode
While turned off, hold Power+Home+Volume Down, then a menu will appear. Press Volume Up to proceed to flash mode.
UART
Accessing UART is possible through the microUSB port by putting a 619kΩ resistor between the ID pin and ground. Read Serial debugging for more on that. Baud rate is 115200.
Status
Downstream kernel does not want to compile yet.
Mainline
It is starting to work, but it still is in a really early stage. Secondary core bringup is broken, and simple framebuffer works.