BQ Aquaris M5 (bq-piccolo): Difference between revisions
No edit summary |
Tags: mobile edit mobile web edit |
||
Line 79: | Line 79: | ||
# Install [https://github.com/degdag/lk2nd-BQ_M5/releases lk2nd]. (Just needed the first time). | # Install [https://github.com/degdag/lk2nd-BQ_M5/releases lk2nd]. (Just needed the first time). | ||
#* '''Warning:''' lk2nd is installed to the <code>boot</code> partition | #* '''Warning:''' lk2nd is installed to the <code>boot</code> partition. | ||
When you have lk2nd installed and running, follow [[Qualcomm_Snapdragon_410/412_(MSM8916)#Installation]]. | When you have lk2nd installed and running, follow [[Qualcomm_Snapdragon_410/412_(MSM8916)#Installation]]. |
Revision as of 20:14, 14 March 2021
![]() BQ Aquaris M5 running Phosh on postmarketOS mainline | |
Manufacturer | BQ |
---|---|
Name | Aquaris M5 |
Codename | bq-piccolo |
Released | 2015 |
Hardware | |
Chipset | Qualcomm MSM8939 Snapdragon 615 (28 nm) |
CPU | Octa-core (4x1.5 GHz Cortex-A53 & 4x1.0 GHz Cortex-A53) |
GPU | Adreno 405 |
Display | 1080 x 1920 (IPS LCD capacitive touchscreen, 16M colors) |
Storage | 16GB / 32GB |
Memory | 2GB / 3GB |
Architecture | aarch64 |
Software | |
Original software | Android 5.1.1 (Lollipop), upgradable to 7.0 (Nougat) |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
postmarketOS kernel | Mainline |
Flashing |
Works |
---|---|
USB Networking |
Partial |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Partial |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Works |
Audio |
Broken |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
Works |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
Broken |
SMS |
Broken |
Mobile data |
Broken |
Miscellaneous | |
FDE |
Broken |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
Works |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
Maintainer(s)
Users owning this device
How to enter flash mode
BQ bootloader
- Recovery: Power on the device with both
Power
andVolume Up
buttons. - Fastboot: Power on the device with both
Power
andVolume Down
buttons
Installation
you should use this pmaports (pmaports)
As for now device not in official pmaports yet.
Unlock bootloader
To unlock your bootloader boot into Android, enable Developer Options from the settings and enable "Allow OEM unlock". Then boot into Fastboot and use fastboot oem unlock
. You might need to use fastboot oem unlock-go
. (Note: All your data will be erased!)
Firmware
It is recommended to flash to latest firmware from BQ before using postmarketos.
postmarketOS
The mainline kernel depends on an alternative bootloader (lk2nd). It does not replace the stock bootloader, but provides its own Fastboot interface. When using the mainline kernel you should always use lk2nd for flashing, not the stock Fastboot mode.
- Install lk2nd. (Just needed the first time).
- Warning: lk2nd is installed to the
boot
partition.
- Warning: lk2nd is installed to the
When you have lk2nd installed and running, follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation.
Audio
See Qualcomm_Snapdragon_410_(MSM8916)#Audio.
This device use WM8998 Arizona sound codec driver already in mainline but i failed to get it up ...
Modem
See Qualcomm_Snapdragon_410_(MSM8916)#Modem.
Modem not tested yet for now