Samsung Galaxy Tab 2 7.0 (samsung-espresso7): Difference between revisions
Appearance
Line 143: | Line 143: | ||
| | | | ||
|- | |- | ||
| | | P | ||
|GPU | |GPU | ||
| | | PowerVR SGX 540 needs out-of-tree kernel module, patched mesa, and some proprietary blobs | ||
|- | |- | ||
|} | |} |
Revision as of 11:30, 14 April 2021
This device is marked as not booting.
![]() Samsung Galaxy Tab 2 7.0 | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Tab 2 7.0 |
Codename | samsung-espresso3g |
Hardware | |
Chipset | TI OMAP 4430 |
CPU | Dual-core 1.0 GHz |
GPU | PowerVR SGX540 |
Display | 7.0 inches, 137.9 cm2 (~58.2% screen-to-body ratio) 600 x 1024 pixels, 16:9 ratio (~170 ppi density) |
Storage | 8/16/32 GB |
Memory | 1 GB |
Architecture | armv7 |
Software | |
Original software | Android |
postmarketOS | |
Category | testing |
Pre-built images | no |
Contributors
- Mighty
Users owning this device
- Casept (Notes: Wi-Fi version)
- Materialred
- Mighty
How to enter flash mode
Press Power + Volume Up to enter download/odin mode.
Installation
What works
- Display
- Touch
- Mate
- WiFi (using nmtui in terminal)
- Battery
Hardware status (mainline)
Status | Hardware | Info |
---|---|---|
Y | Panel | Samsung LTN070NL01 LCD panel |
Y | Touchscreen | Used Melfas MMS114 touchscreen. |
N | SD cards | MicroSD card. |
Y | Internal memory | |
N | GPS | |
N | WiFi | Uses BCM4330. |
N | Bluetooth | Uses BCM4330. |
N | GPIO keys | There are 3 keys on GPIO: Power, Volume up, Volume down. |
N | Vibro | |
N | Battery/Charger | Battery uses MAX17042 driver, and charger uses SMB136 driver for detection. |
N | PMIC | TWL6032 (??) |
N | Sound | Sound codec is WM8994. |
N | Accelerometer | BMA250 |
N | Magnetometer | YAS530 |
N | Proximity | gp2a |
N | Light sensor | bh1721fvc |
N | Front camera | |
N | Rear camera | |
P | GPU | PowerVR SGX 540 needs out-of-tree kernel module, patched mesa, and some proprietary blobs |
See also
Screenshots
-
Mate on Samsung Galaxy Tab 2 7.0
-
Mate on Samsung Galaxy Tab 2 7.0