Samsung Galaxy Grand Prime Plus (samsung-grandpplte): Difference between revisions
Appearance
Update status |
→Status: Add info about using arm-eabi-4.8 |
||
Line 53: | Line 53: | ||
== Status == | == Status == | ||
Downstream kernel does not want to compile yet. | Downstream kernel does not want to compile yet. | ||
Building with the [https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8 Android <code>arm-eabi-4.8</code>] toolchain works, and postmarketOS boots with the resulting kernel, but it can't be integrated into pmaports in this state. | |||
== Mainline == | == Mainline == |
Revision as of 18:14, 16 April 2021
WARNING: This device cannot run postmarketOS, as its architecture is unsupported. |
This device is marked as not booting.
![]() Grand Prime+ running stock Android | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Grand Prime+ |
Codename | samsung-grandpplte |
Released | 2016 |
Hardware | |
Chipset | MediaTek MT6737T |
CPU | 4x 1.44 GHz Cortex-A53 |
GPU | Mali-T720 MP2 |
Display | 540x960 LCD |
Storage | 8 GB |
Memory | 1.5 GB |
Architecture | aarch64 (cpu is aarch64, but oem software is armv7) |
Software | |
Original software | Android 6.0.1 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Contributors
- Tooniis
Users owning this device
- Tooniis (Notes: SM-G532F)
How to enter flash mode
While turned off, hold Power+Home+Volume Down, then a menu will appear. Press Volume Up to proceed to flash mode.
UART
Accessing UART is possible through the microUSB port by putting a 619kΩ resistor between the ID pin and ground. Read Serial debugging for more on that. Baud rate is 115200.
Status
Downstream kernel does not want to compile yet.
Building with the Android arm-eabi-4.8
toolchain works, and postmarketOS boots with the resulting kernel, but it can't be integrated into pmaports in this state.
Mainline
It is starting to work, but it still is in a really early stage. Secondary core bringup is broken, and simple framebuffer works.