Jump to content

Samsung Galaxy Tab 2 7.0 (samsung-espresso7): Difference between revisions

From postmarketOS Wiki
Sicelo (talk | contribs)
AAT596 (talk | contribs)
No edit summary
Line 33: Line 33:
| status_calls = <!-- Talking to other people over the cellular network. -->
| status_calls = <!-- Talking to other people over the cellular network. -->
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" -->
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" -->
| booting = no <!-- The device is booting at all, can be yes/no *IMPORTANT* -->
| booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* -->


<!-- you can also use these lines if you need to:
<!-- you can also use these lines if you need to:

Revision as of 12:49, 21 April 2021

Samsung Galaxy Tab 2 7.0
Samsung Galaxy Tab 2 7.0
Samsung Galaxy Tab 2 7.0
Manufacturer Samsung
Name Galaxy Tab 2 7.0
Codename samsung-espresso3g
Hardware
Chipset TI OMAP 4430
CPU Dual-core 1.0 GHz
GPU PowerVR SGX540
Display 7.0 inches, 137.9 cm2 (~58.2% screen-to-body ratio) 600 x 1024 pixels, 16:9 ratio (~170 ppi density)
Storage 8/16/32 GB
Memory 1 GB
Architecture armv7
Software
Original software Android
postmarketOS
Category testing
Pre-built images no
Features
Flashing
No data
USB Networking
No data
Internal storage
No data
SD card
No data
Battery
No data
Screen
No data
Touchscreen
No data
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • Mighty

Users owning this device


  • Mighty

How to enter flash mode

Press Power + Volume Up to enter download/odin mode.

Installation

What works

  • Display
  • Touch
  • Mate
  • WiFi (using nmtui in terminal)
  • Battery

Hardware status (mainline)

Status Hardware Info
Y Panel Samsung LTN070NL01 LCD panel
Y Touchscreen Used Melfas MMS114 touchscreen.
N SD cards MicroSD card.
Y Internal memory
N GPS
N WiFi Uses BCM4330.
N Bluetooth Uses BCM4330.
N GPIO keys There are 3 keys on GPIO: Power, Volume up, Volume down.
N Vibro
N Battery/Charger Battery uses MAX17042 driver, and charger uses SMB136 driver for detection.
N PMIC TWL6032 (??)
N Sound Sound codec is WM8994.
N Accelerometer BMA250
N Magnetometer YAS530
N Proximity gp2a
N Light sensor bh1721fvc
N Front camera
N Rear camera
P GPU PowerVR SGX 540 needs out-of-tree kernel module, patched mesa, and some proprietary blobs

See also

Screenshots