Samsung Galaxy Tab 2 7.0 (samsung-espresso7): Difference between revisions
Added more info in detail |
m Add release year |
||
Line 5: | Line 5: | ||
| image = File:Tab2_7.0.jpg | | image = File:Tab2_7.0.jpg | ||
| imagecaption = Samsung Galaxy Tab 2 7.0 | | imagecaption = Samsung Galaxy Tab 2 7.0 | ||
| releaseyear = 2012 | |||
| originalsoftware = Android | | originalsoftware = Android | ||
| chipset = TI OMAP 4430 | | chipset = TI OMAP 4430 |
Revision as of 16:04, 1 August 2021
![]() Samsung Galaxy Tab 2 7.0 | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Tab 2 7.0 |
Codename | samsung-espresso3g |
Released | 2012 |
Hardware | |
Chipset | TI OMAP 4430 |
CPU | Dual-core 1.0 GHz |
GPU | PowerVR SGX540 |
Display | 7.0 inches, 137.9 cm2 (~58.2% screen-to-body ratio) 600 x 1024 pixels, 16:9 ratio (~170 ppi density) |
Storage | 8/16/32 GB |
Memory | 1 GB |
Architecture | armv7 |
Software | |
Original software | Android |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
postmarketOS kernel | 3.0.101 and 5.12-rc1 |
Unixbench Whet/Dhry score | 580.4 Downstream, 415.1 Mainline |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Partial |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
Works |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- Mighty
Users owning this device
- Casept (Notes: Wi-Fi version)
- Materialred
How to enter flash mode
Press Power + Volume Up to enter download/odin mode. Press Power + Volume Down to enter recovery.
What works (downstream)
- Display
- Touch
- Mate
- WiFi (using nmtui in terminal)
- Battery
Hardware status (mainline)
Status | Hardware | Info |
---|---|---|
Y | Panel | Samsung LTN070NL01 LCD panel |
Y | Touchscreen | MMS136 |
Y | SD cards | MicroSD card. |
Y | Internal memory | |
N | GPS | |
Y | WiFi | Uses BCM4330B1. |
P | Bluetooth | Uses BCM4330. (Firmware issue?) |
N | GPIO keys | There are 2 keys on GPIO: Volume up, Volume down. |
P | Charger | SMB136 WIP by mighty17 |
Y | Fuel Gauge | MAX17042 |
Y | PMIC | TWL6032 |
N | Sound | Sound codec is WM8994. |
Y | Accelerometer | BMA254 |
Y | Magnetometer | YAS530 |
N | Proximity and Light | The P3100 variant has GP2A002, P3110 variant has AL3201. |
N | Cameras | Front - SR030PC50 Back - S5K5CCGX (OMAP4 devices have Ducati firmware for cameras) |
P | GPU | PowerVR SGX 540 needs out-of-tree kernel module, patched mesa, and some proprietary blobs |
STATUS
Display
OMAPDRM works fine.
Display seems to be running at 30Hz due to the clock speed for 60Hz not working properly.
Brightness needs a correct PWM clock value until that is done it flickers at low brightness.
Touchscreen
Touchscreen is MMS136 and it works fine. Already in upstream.
Bluetooth
Bluetooth does not work, looks like firmware has some issue (?).
Battery
Fuel gauge works fine. The charger driver is WIP, if connected to usb during boot, then only it charges.
Camera
OMAP4 has different subsystem (Ducati) for camera which is non free. Probably will never work on mainline.
3D GPU Acceleration
3D acceleration works fine. It crashes sometimes like when opening firefox. Video decoding does not work as it is done by Ducati subsystem.
See also
Downstream kernel:
Mainline WIP kernel:
Screenshots
-
Mate on Samsung Galaxy Tab 2 7.0
-
Mate on Samsung Galaxy Tab 2 7.0
-
Phosh (5.12 kernel) on Samsung Galaxy Tab 2 7.0