Initramfs/Development: Difference between revisions
Migrate from https://github.com/postmarketOS/pmbootstrap/wiki |
m Ollieparanoid moved page Initramfs-development to Initramfs development |
(No difference)
|
Revision as of 11:50, 26 August 2017
We have two initramfs files
After the installation, you will have two initramfs files in your device's /boot
folder.
% ls ~/.local/var/pmbootstrap/chroot_rootfs_samsung-i9100/boot initramfs-samsung-i9100 initramfs-samsung-i9100-extra vmlinuz-samsung-i9100
Regular Linux distributions only have one initramfs file. We have split it into two to work around the size limitations, that some devices have. The regular initramfs is relatively small (~1.5 mb, and we could make it smaller if necessary!) and loads the contents of the initramfs-extra from the pmOS boot partition during the boot process.
The pmOS boot partition is a subpartition of the system partition (SD cards: simply a real partition on the SD card), so we can make it almost as big as we want.
Recommended development workflow
- Only do one small change at a time
- Rebuild and test on device (
pmbootstrap initfs
,pmbootstrap flasher flash_kernel
) - When it works, version your change with git
- Repeat
When you change too much, it will simply not work and you most likely will have no idea why it does not work. Go back to the last working version and do smaller changes at a time.
Tips and tricks
- Familiarize with inspecting the initramfs
pmbootstrap initfs
can do more than rebuilding the initramfs:
% pmbootstrap initfs --help usage: pmbootstrap initfs [-h] {hook_ls,hook_add,hook_del,ls,build,extract} ... positional arguments: {hook_ls,hook_add,hook_del,ls,build,extract} hook_ls list available and installed hook packages hook_add add a hook package hook_del uninstall a hook package ls list initramfs contents build (re)build the initramfs extract extract the initramfs to a temporary folder optional arguments: -h, --help show this help message and exit
Troubleshooting
My device reboots with my customized init script
This is probably caused by a syntax error. Use shellcheck
to check your scripts for syntax errors. You could also loop forever or spawn a shell (if you have a hardware keyboard or serial cable connected) at some point for debugging (while true; do sleep 1; done
) and use the telnet shell to test the commands, that are failing, interactively.
No log output on serial!
By default, all output from the initramfs get redirected to /pmOS_init.log
. If you want the output through the debug cable you need to add PMOS_NO_OUTPUT_REDIRECT
to your kernel command line.