Jolla Phone (jolla-sbj): Difference between revisions
Appearance
Replace Category:Unsupported device with Category:Not booting and remove Category:Device (since the infobox template sets that anyway!) |
PureTryOut (talk | contribs) |
||
Line 21: | Line 21: | ||
== What works == | == What works == | ||
* Compiling the kernel from the | * Compiling the kernel from the Jolla sources which should provide everything to run Wayland since that's what Sailfish uses | ||
* Booting | |||
* USB | |||
* SSH (after some manual configuration) | |||
== What does not work == | == What does not work == |
Revision as of 11:26, 21 February 2018
![]() Jolla Phone | |
Manufacturer | Jolla |
---|---|
Name | Phone (?) |
Codename | sbj |
Released | 2013 |
Hardware | |
Chipset | Qualcomm Snapdragon 400 |
CPU | Dual-core 1.4 GHz Krait 300 |
GPU | Adreno 305 |
Display | 540x960 IPS |
Storage | 16 GB |
Memory | 1 GB |
Software | |
Original software | Sailfish 1 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- MartijnBraam
What works
- Compiling the kernel from the Jolla sources which should provide everything to run Wayland since that's what Sailfish uses
- Booting
- USB
- SSH (after some manual configuration)
What does not work
- Flashing, still need to find the correct offsets
Flashing mode
The jolla does use fastboot from the mer project instead of android. To enter fastboot shut down the device, then plug in the USB lead while holding down volume down.