Jolla Phone (jolla-sbj): Difference between revisions
Appearance
PureTryOut (talk | contribs) |
PureTryOut (talk | contribs) |
||
Line 32: | Line 32: | ||
== Flashing mode == | == Flashing mode == | ||
The | The Jolla phone uses fastboot from the Mer project rather than Android. To enter fastboot shut down the device, then plug in the USB lead while holding down volume down. | ||
== Links == | == Links == |
Revision as of 11:26, 21 February 2018
![]() Jolla Phone | |
Manufacturer | Jolla |
---|---|
Name | Phone (?) |
Codename | sbj |
Released | 2013 |
Hardware | |
Chipset | Qualcomm Snapdragon 400 |
CPU | Dual-core 1.4 GHz Krait 300 |
GPU | Adreno 305 |
Display | 540x960 IPS |
Storage | 16 GB |
Memory | 1 GB |
Software | |
Original software | Sailfish 1 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- MartijnBraam
What works
- Compiling the kernel from the Jolla sources which should provide everything to run Wayland since that's what Sailfish uses
- Booting
- USB
- SSH (after some manual configuration)
What does not work
- Flashing, still need to find the correct offsets
Flashing mode
The Jolla phone uses fastboot from the Mer project rather than Android. To enter fastboot shut down the device, then plug in the USB lead while holding down volume down.