OnePlus 3 (oneplus-oneplus3): Difference between revisions
Appearance
Ungeskriptet (talk | contribs) Add picture |
Ungeskriptet (talk | contribs) m →UART: New section |
||
Line 64: | Line 64: | ||
== Installation == | == Installation == | ||
<!-- add more sections below as necessary, e.g. WiFi, photos, ... --> | <!-- add more sections below as necessary, e.g. WiFi, photos, ... --> | ||
== UART == | |||
Start by removing the 2 T2 screws at the bottom which are holding the back cover together and then pry the back cover up from the bottom. The 2 points are located below the camera | |||
{{note|'''Note:''' For some peculiar reason, UART doesn't work with the back cover attached.}} | |||
[[File:Oneplus-oneplus3_UART.png|frameless]] | |||
<div class="toccolours mw-collapsible mw-collapsed" style="width: 620px; overflow: auto;"> | |||
Bootloader UART logs: | |||
<div class="mw-collapsible-content"> | |||
Format: Log Type - Time(microsec) - Message - Optional Info | |||
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic | |||
S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00316 | |||
S - IMAGE_VARIANT_STRING=M8996LAB | |||
S - OEM_IMAGE_VERSION_STRING=rd-build-193 | |||
S - Note XBL compiled at Nov 4 2019 21:08:39 | |||
S - Boot Interface: UFS | |||
S - Secure Boot: On | |||
S - Boot Config @ 0x00076044 = 0x000001c9 | |||
S - JTAG ID @ 0x000760f4 = 0x409470e1 | |||
S - OEM ID @ 0x000760f8 = 0x2a703db9 | |||
S - Serial Number @ 0x00074138 = 0x6abfe9f1 | |||
S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100 | |||
S - Feature Config Row 1 @ 0x000741a8 = 0x0001000000000000 | |||
S - Core 0 Frequency, 1228 MHz | |||
B - 0 - PBL, Start | |||
B - 10414 - bootable_media_detect_entry, Start | |||
B - 45926 - bootable_media_detect_success, Start | |||
B - 45930 - elf_loader_entry, Start | |||
B - 46916 - auth_hash_seg_entry, Start | |||
B - 47896 - auth_hash_seg_exit, Start | |||
B - 79705 - elf_segs_hash_verify_entry, Start | |||
B - 82200 - PBL, End | |||
B - 84241 - SBL1, Start | |||
B - 174521 - usb: hs_phy_nondrive_start | |||
B - 174856 - usb: PLL lock success - 0x3 | |||
B - 177845 - usb: hs_phy_nondrive_finish | |||
B - 181993 - boot_flash_init, Start | |||
D - 30 - boot_flash_init, Delta | |||
B - 189100 - sbl1_ddr_set_default_params, Start | |||
D - 30 - sbl1_ddr_set_default_params, Delta | |||
B - 197060 - boot_config_data_table_init, Start | |||
B - 430782 - CDT not programmed, using default | |||
D - 229238 - boot_config_data_table_init, Delta - (54 Bytes) | |||
B - 434106 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0 | |||
B - 439932 - Image Load, Start | |||
D - 22082 - PMIC Image Loaded, Delta - (37464 Bytes) | |||
B - 462014 - pm_device_init, Start | |||
B - 467748 - PON REASON:PM0:0x2000000a0 PM1:0x2000000a0 | |||
B - 504287 - PM_SET_VAL:Skip | |||
D - 40138 - pm_device_init, Delta | |||
B - 506208 - pm_driver_init, Start | |||
D - 2989 - pm_driver_init, Delta | |||
B - 512796 - pm_sbl_chg_init, Start | |||
D - 305 - pm_sbl_chg_init, Delta | |||
B - 519567 - vsense_init, Start | |||
D - 0 - vsense_init, Delta | |||
B - 527345 - Pre_DDR_clock_init, Start | |||
D - 366 - Pre_DDR_clock_init, Delta | |||
B - 533170 - ddr_initialize_device, Start | |||
B - 536861 - 8996 v3.x detected, Max frequency = 1.8 GHz | |||
B - 540917 - hw_self_refresh_enable = 0 | |||
B - 546285 - reboot_reason = 0x0 | |||
B - 555466 - hw_self_refresh_enable = 0 | |||
B - 555496 - reboot_reason = 0x0 | |||
B - 559095 - ddr_initialize_device, Delta | |||
B - 561566 - DDR ID, Rank 0, Rank 1, 0x1, 0x600, 0x600 | |||
B - 565653 - Basic DDR tests done | |||
B - 625860 - clock_init, Start | |||
D - 244 - clock_init, Delta | |||
B - 627873 - Image Load, Start | |||
D - 5856 - QSEE Dev Config Image Loaded, Delta - (48160 Bytes) | |||
B - 634217 - Image Load, Start | |||
D - 7320 - APDP Image Loaded, Delta - (7696 Bytes) | |||
B - 642879 - Image Load, Start | |||
D - 57004 - QSEE Image Loaded, Delta - (1704316 Bytes) | |||
B - 699914 - Image Load, Start | |||
D - 183 - SEC Image Loaded, Delta - (4096 Bytes) | |||
B - 707478 - sbl1_efs_handle_cookies, Start | |||
D - 305 - sbl1_efs_handle_cookies, Delta | |||
B - 715957 - Image Load, Start | |||
D - 14548 - QHEE Image Loaded, Delta - (262592 Bytes) | |||
B - 730536 - Image Load, Start | |||
D - 13969 - RPM Image Loaded, Delta - (223932 Bytes) | |||
B - 744840 - Image Load, Start | |||
D - 3630 - STI Image Loaded, Delta - (0 Bytes) | |||
B - 751642 - Image Load, Start | |||
D - 89151 - APPSBL Image Loaded, Delta - (1667588 Bytes) | |||
B - 840885 - SBL1, End | |||
D - 760883 - SBL1, Delta | |||
S - Flash Throughput, 115000 KB/s (3960114 Bytes, 34237 us) | |||
S - DDR Frequency, 1017 MHz | |||
Android Bootloader - UART_DM Initialized!!! | |||
[0] Note LK compiled at Nov 4 2019 21:18:46 | |||
[40] UFS init success | |||
[40] ----Inquiry buffer---- | |||
[40] [Oneplus]buf[0] = 0 | |||
[40] [Oneplus]buf[1] = 0 | |||
[40] [Oneplus]buf[2] = 6 | |||
[50] [Oneplus]buf[3] = 2 | |||
[50] [Oneplus]buf[4] = 1f | |||
[50] [Oneplus]buf[5] = 0 | |||
[50] [Oneplus]buf[6] = 0 | |||
[60] [Oneplus]buf[7] = 2 | |||
[60] [Oneplus]buf[8] = 53 | |||
[60] [Oneplus]buf[9] = 41 | |||
[60] [Oneplus]buf[10] = 4d | |||
[70] [Oneplus]buf[11] = 53 | |||
[70] [Oneplus]buf[12] = 55 | |||
[70] [Oneplus]buf[13] = 4e | |||
[70] [Oneplus]buf[14] = 47 | |||
[70] [Oneplus]buf[15] = 0 | |||
[80] [Oneplus]buf[16] = 4b | |||
[80] [Oneplus]buf[17] = 4c | |||
[80] [Oneplus]buf[18] = 55 | |||
[80] [Oneplus]buf[19] = 43 | |||
[90] [Oneplus]buf[20] = 47 | |||
[90] [Oneplus]buf[21] = 34 | |||
[90] [Oneplus]buf[22] = 4a | |||
[90] [Oneplus]buf[23] = 31 | |||
[100] [Oneplus]buf[24] = 43 | |||
[100] [Oneplus]buf[25] = 42 | |||
[100] [Oneplus]buf[26] = 2d | |||
[100] [Oneplus]buf[27] = 42 | |||
[110] [Oneplus]buf[28] = 30 | |||
[110] [Oneplus]buf[29] = 42 | |||
[110] [Oneplus]buf[30] = 31 | |||
[110] [Oneplus]buf[31] = 0 | |||
[120] [Oneplus]buf[32] = 30 | |||
[120] [Oneplus]buf[33] = 38 | |||
[120] [Oneplus]buf[34] = 30 | |||
[120] [Oneplus]buf[35] = 30 | |||
[130] ----end of buffer--- | |||
[130] ucs_scsi_send_inquiry_revision :0800 | |||
[130] FFU is successful! | |||
[140] get_param_by_index_and_offset[50] sid_index = 1 offset = 24 buf = 0x91e9d880 length = 4 | |||
[150] set_msm_boot_mode_by_gpio : enter | |||
[150] GPIO detect: MSM_BOOT_MODE__NORMAL | |||
[170] set_msm_boot_mode_by_share_memory_args : Reboot mode by mem args =0x0 | |||
[170] project name is null and use default 15801 | |||
[190] start_pwrkey_monitor_func : press | |||
[200] bq27541_dsi_i2c_read | |||
[200] get bq27541 DCAP_H=0xe | |||
[200] get_hw_version=16,bat_type=11,HW_VERSION__28=28 | |||
[210] FG: gain -20 raw_vbat 4173 calibrated_vbat 3964 errFlag = 0 | |||
[210] stored_soc[0x0], shutdown_soc[-1] | |||
[220] Qseecom Init Done in Appsbl version is 0x1001000 | |||
[220] secure app region addr=0x86600000 size=0x2200000[230] TZ App region notif returned with status:0 addr:86600000 size:35651584 | |||
[230] TZ App log region register returned with status:0 addr:91edb000 size:4096 | |||
[240] Qseecom TZ Init Done in Appsbl | |||
[270] Loading cmnlib done | |||
[300] <8>keymaster: "\"KEYMASTER Init \"" | |||
[300] <8>keymaster: "\"Error: qsee_cfg_getpropval in get_enable_set_bandwidth failed for enable_set_bandwidth, ret_size = 0\" | |||
[310] <8>keymaster: "\"open_add_km_partition status:0\"" | |||
[330] RPMB is enable | |||
[330] RPMB is enable, we do not change enable_dm_verity value in devinfo. | |||
[330] get_param_by_index_and_offset[50] sid_index = 12 offset = 416 buf = 0x91ed0950 length = 4 | |||
[400] start_pwrkey_monitor_func : press | |||
[890] Not able to search the panel: | |||
[900] init_panel_data: SAMSUNG_S6E3FA3_1080P_CMD_PANEL | |||
[900] Return value from recv_data: 14 | |||
[910] Return value from recv_data: 14 | |||
[920] Return value from recv_data: 14 | |||
[940] is_usb_present: FALSE | |||
[940] LOGO: MSM_BOOT_MODE__NORMAL | |||
[1020] read the LCD ID register is 0x4 | |||
[1020] match s6e3fa3 id successfully | |||
[1130] set samsung brightness 68 | |||
[1140] Device is unlocked! Skipping verification... | |||
[1190] Loading (boot) image (10977280): done | |||
[6400] is_usb_present: FALSE | |||
[6410] LOGO: MSM_BOOT_MODE__NORMAL | |||
[6420] Return value from recv_data: 14 | |||
[6430] Return value from recv_data: 14 | |||
[6440] Return value from recv_data: 14 | |||
[6450] <8>keymaster: "\"len: 48\"" | |||
[6450] <8>keymaster: "\"boot state: 48\"" | |||
[6460] <8>keymaster: "\"is_unlocked: 1\"" | |||
[6460] <8>keymaster: "\"color: 1\"" | |||
[6460] <8>keymaster: "\"system_version: 0\"" | |||
[6470] <8>keymaster: "\"system_security_level 0\"" | |||
[6470] Sending Root of Trust to trustzone: end | |||
[6770] set_msm_boot_mode_by_uart : enter | |||
# �_# # [6920] COLD: power_on_reason is PON1 [0xa0] | |||
[6920] COLD: power_on_reason is KPADPWR_N [0xa0] | |||
[6920] COLD: power_off_reason is PS_HOLD [0x2] | |||
[6930] get_param_by_index_and_offset[50] sid_index = 0 offset = 76 buf = 0x91ed0720 length = 28 | |||
[6940] get_param_by_index_and_offset[50] sid_index = 12 offset = 412 buf = 0x91ed0708 length = 4 | |||
[6950] get_param_by_index_and_offset[50] sid_index = 10 offset = 128 buf = 0x91ed0704 length = 4 | |||
[6950] get_param_by_index_and_offset[50] sid_index = 12 offset = 408 buf = 0x91ed06e8 length = 4 | |||
[6960] boot_stage:0x9012 | |||
[6970] get_param_by_index_and_offset[50] sid_index = 12 offset = 412 buf = 0x91ed06e8 length = 4 | |||
[6970] data_stage:0x1234 | |||
[6980] RPMB is enable | |||
[6980] get_param_by_index_and_offset[50] sid_index = 12 offset = 424 buf = 0x91ed0708 length = 4 | |||
[6990] get_param_by_index_and_offset[50] sid_index = 0 offset = 76 buf = 0x91ed0728 length = 28 | |||
[7000] Failed to get parent node: fstab error: -1 | |||
[7000] ERROR: Cannot update fstab node | |||
[7010] Success [7010] Return value from recv_data: 14 | |||
[7020] Qseecom De-Init Done in Appsbl | |||
</div> | |||
</div> | |||
== See Also == | == See Also == |
Revision as of 18:52, 13 May 2022
![]() OnePlus 3 with Plasma Mobile UI | |
Manufacturer | OnePlus |
---|---|
Name | 3 |
Codename | oneplus-oneplus3 |
Released | 2016 |
Hardware | |
Chipset | Qualcomm MSM8996 Snapdragon 820 |
CPU |
Kryo 2x2.2 GHz 2x1.6 Ghz |
GPU | Adreno 530 |
Display | 1080x1920 AMOLED |
Storage | 64 GB |
Memory | 6 GB |
Architecture | aarch64 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Flashing |
Works |
---|---|
USB Networking |
Broken |
Internal storage |
No data |
SD card |
No data |
Battery |
Broken |
Screen |
Broken |
Touchscreen |
Broken |
Multimedia | |
3D Acceleration |
Broken |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
Bluetooth |
Broken |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
This device is based on the Snapdragon 820. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
Maintainer(s)
Users owning this device
- Bczeman
- Bdju (Notes: partially broken/disassembled)
- Caesarhao (Notes: European version)
- Harryausten (Notes: disassembled with UART connected)
- Jja2000
- Jrg (Notes: Broken touchscreen)
- MasterPlexus (Notes: still on Lineage)
- Nspire
- Rjeli
- Roboe (Notes: bloated battery (removed), might try to make a charging circuit or get a replacement sometime; aftermarket screen replacement, lot of issues with CPU suspend; running Lineage OS)
- Santeri3700
- Shubhamvis98
- Ungeskriptet (Notes: Glass lifts off a little, needs new glue)
Unlocking the Bootloader
WARNING: Doing this will wipe ALL data on your device. Please backup all your personal data before continuing!
- Enable
Developer options
by tapping the build number 7 times inSettings
>About
- Go to
Developer options
and enable bothUSB Debugging
andOEM Unlocking
- Open a terminal window and type
adb devices
to verify your device is visible. - Type
adb reboot bootloader
to reboot your device into fastboot mode. - Type
fastboot devices
to verify once again that your device is visible. - Type
fastboot oem unlock
. To navigate the on screen options use and select an option with the button. - Congrats, your bootloader is now unlocked!
Enter Flashmode
- After the bootloader is unlocked press the button and you should see the warning screen. Press to open the boot options.
- Select
Fastboot
and press
You are now ready to flash.
Installation
UART
Start by removing the 2 T2 screws at the bottom which are holding the back cover together and then pry the back cover up from the bottom. The 2 points are located below the camera
Note: For some peculiar reason, UART doesn't work with the back cover attached. |
Bootloader UART logs:
Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00316 S - IMAGE_VARIANT_STRING=M8996LAB S - OEM_IMAGE_VERSION_STRING=rd-build-193 S - Note XBL compiled at Nov 4 2019 21:08:39 S - Boot Interface: UFS S - Secure Boot: On S - Boot Config @ 0x00076044 = 0x000001c9 S - JTAG ID @ 0x000760f4 = 0x409470e1 S - OEM ID @ 0x000760f8 = 0x2a703db9 S - Serial Number @ 0x00074138 = 0x6abfe9f1 S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100 S - Feature Config Row 1 @ 0x000741a8 = 0x0001000000000000 S - Core 0 Frequency, 1228 MHz B - 0 - PBL, Start B - 10414 - bootable_media_detect_entry, Start B - 45926 - bootable_media_detect_success, Start B - 45930 - elf_loader_entry, Start B - 46916 - auth_hash_seg_entry, Start B - 47896 - auth_hash_seg_exit, Start B - 79705 - elf_segs_hash_verify_entry, Start B - 82200 - PBL, End B - 84241 - SBL1, Start B - 174521 - usb: hs_phy_nondrive_start B - 174856 - usb: PLL lock success - 0x3 B - 177845 - usb: hs_phy_nondrive_finish B - 181993 - boot_flash_init, Start D - 30 - boot_flash_init, Delta B - 189100 - sbl1_ddr_set_default_params, Start D - 30 - sbl1_ddr_set_default_params, Delta B - 197060 - boot_config_data_table_init, Start B - 430782 - CDT not programmed, using default D - 229238 - boot_config_data_table_init, Delta - (54 Bytes) B - 434106 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0 B - 439932 - Image Load, Start D - 22082 - PMIC Image Loaded, Delta - (37464 Bytes) B - 462014 - pm_device_init, Start B - 467748 - PON REASON:PM0:0x2000000a0 PM1:0x2000000a0 B - 504287 - PM_SET_VAL:Skip D - 40138 - pm_device_init, Delta B - 506208 - pm_driver_init, Start D - 2989 - pm_driver_init, Delta B - 512796 - pm_sbl_chg_init, Start D - 305 - pm_sbl_chg_init, Delta B - 519567 - vsense_init, Start D - 0 - vsense_init, Delta B - 527345 - Pre_DDR_clock_init, Start D - 366 - Pre_DDR_clock_init, Delta B - 533170 - ddr_initialize_device, Start B - 536861 - 8996 v3.x detected, Max frequency = 1.8 GHz B - 540917 - hw_self_refresh_enable = 0 B - 546285 - reboot_reason = 0x0 B - 555466 - hw_self_refresh_enable = 0 B - 555496 - reboot_reason = 0x0 B - 559095 - ddr_initialize_device, Delta B - 561566 - DDR ID, Rank 0, Rank 1, 0x1, 0x600, 0x600 B - 565653 - Basic DDR tests done B - 625860 - clock_init, Start D - 244 - clock_init, Delta B - 627873 - Image Load, Start D - 5856 - QSEE Dev Config Image Loaded, Delta - (48160 Bytes) B - 634217 - Image Load, Start D - 7320 - APDP Image Loaded, Delta - (7696 Bytes) B - 642879 - Image Load, Start D - 57004 - QSEE Image Loaded, Delta - (1704316 Bytes) B - 699914 - Image Load, Start D - 183 - SEC Image Loaded, Delta - (4096 Bytes) B - 707478 - sbl1_efs_handle_cookies, Start D - 305 - sbl1_efs_handle_cookies, Delta B - 715957 - Image Load, Start D - 14548 - QHEE Image Loaded, Delta - (262592 Bytes) B - 730536 - Image Load, Start D - 13969 - RPM Image Loaded, Delta - (223932 Bytes) B - 744840 - Image Load, Start D - 3630 - STI Image Loaded, Delta - (0 Bytes) B - 751642 - Image Load, Start D - 89151 - APPSBL Image Loaded, Delta - (1667588 Bytes) B - 840885 - SBL1, End D - 760883 - SBL1, Delta S - Flash Throughput, 115000 KB/s (3960114 Bytes, 34237 us) S - DDR Frequency, 1017 MHz Android Bootloader - UART_DM Initialized!!! [0] Note LK compiled at Nov 4 2019 21:18:46 [40] UFS init success [40] ----Inquiry buffer---- [40] [Oneplus]buf[0] = 0 [40] [Oneplus]buf[1] = 0 [40] [Oneplus]buf[2] = 6 [50] [Oneplus]buf[3] = 2 [50] [Oneplus]buf[4] = 1f [50] [Oneplus]buf[5] = 0 [50] [Oneplus]buf[6] = 0 [60] [Oneplus]buf[7] = 2 [60] [Oneplus]buf[8] = 53 [60] [Oneplus]buf[9] = 41 [60] [Oneplus]buf[10] = 4d [70] [Oneplus]buf[11] = 53 [70] [Oneplus]buf[12] = 55 [70] [Oneplus]buf[13] = 4e [70] [Oneplus]buf[14] = 47 [70] [Oneplus]buf[15] = 0 [80] [Oneplus]buf[16] = 4b [80] [Oneplus]buf[17] = 4c [80] [Oneplus]buf[18] = 55 [80] [Oneplus]buf[19] = 43 [90] [Oneplus]buf[20] = 47 [90] [Oneplus]buf[21] = 34 [90] [Oneplus]buf[22] = 4a [90] [Oneplus]buf[23] = 31 [100] [Oneplus]buf[24] = 43 [100] [Oneplus]buf[25] = 42 [100] [Oneplus]buf[26] = 2d [100] [Oneplus]buf[27] = 42 [110] [Oneplus]buf[28] = 30 [110] [Oneplus]buf[29] = 42 [110] [Oneplus]buf[30] = 31 [110] [Oneplus]buf[31] = 0 [120] [Oneplus]buf[32] = 30 [120] [Oneplus]buf[33] = 38 [120] [Oneplus]buf[34] = 30 [120] [Oneplus]buf[35] = 30 [130] ----end of buffer--- [130] ucs_scsi_send_inquiry_revision :0800 [130] FFU is successful! [140] get_param_by_index_and_offset[50] sid_index = 1 offset = 24 buf = 0x91e9d880 length = 4 [150] set_msm_boot_mode_by_gpio : enter [150] GPIO detect: MSM_BOOT_MODE__NORMAL [170] set_msm_boot_mode_by_share_memory_args : Reboot mode by mem args =0x0 [170] project name is null and use default 15801 [190] start_pwrkey_monitor_func : press [200] bq27541_dsi_i2c_read [200] get bq27541 DCAP_H=0xe [200] get_hw_version=16,bat_type=11,HW_VERSION__28=28 [210] FG: gain -20 raw_vbat 4173 calibrated_vbat 3964 errFlag = 0 [210] stored_soc[0x0], shutdown_soc[-1] [220] Qseecom Init Done in Appsbl version is 0x1001000 [220] secure app region addr=0x86600000 size=0x2200000[230] TZ App region notif returned with status:0 addr:86600000 size:35651584 [230] TZ App log region register returned with status:0 addr:91edb000 size:4096 [240] Qseecom TZ Init Done in Appsbl [270] Loading cmnlib done [300] <8>keymaster: "\"KEYMASTER Init \"" [300] <8>keymaster: "\"Error: qsee_cfg_getpropval in get_enable_set_bandwidth failed for enable_set_bandwidth, ret_size = 0\" [310] <8>keymaster: "\"open_add_km_partition status:0\"" [330] RPMB is enable [330] RPMB is enable, we do not change enable_dm_verity value in devinfo. [330] get_param_by_index_and_offset[50] sid_index = 12 offset = 416 buf = 0x91ed0950 length = 4 [400] start_pwrkey_monitor_func : press [890] Not able to search the panel: [900] init_panel_data: SAMSUNG_S6E3FA3_1080P_CMD_PANEL [900] Return value from recv_data: 14 [910] Return value from recv_data: 14 [920] Return value from recv_data: 14 [940] is_usb_present: FALSE [940] LOGO: MSM_BOOT_MODE__NORMAL [1020] read the LCD ID register is 0x4 [1020] match s6e3fa3 id successfully [1130] set samsung brightness 68 [1140] Device is unlocked! Skipping verification... [1190] Loading (boot) image (10977280): done [6400] is_usb_present: FALSE [6410] LOGO: MSM_BOOT_MODE__NORMAL [6420] Return value from recv_data: 14 [6430] Return value from recv_data: 14 [6440] Return value from recv_data: 14 [6450] <8>keymaster: "\"len: 48\"" [6450] <8>keymaster: "\"boot state: 48\"" [6460] <8>keymaster: "\"is_unlocked: 1\"" [6460] <8>keymaster: "\"color: 1\"" [6460] <8>keymaster: "\"system_version: 0\"" [6470] <8>keymaster: "\"system_security_level 0\"" [6470] Sending Root of Trust to trustzone: end [6770] set_msm_boot_mode_by_uart : enter # �_# # [6920] COLD: power_on_reason is PON1 [0xa0] [6920] COLD: power_on_reason is KPADPWR_N [0xa0] [6920] COLD: power_off_reason is PS_HOLD [0x2] [6930] get_param_by_index_and_offset[50] sid_index = 0 offset = 76 buf = 0x91ed0720 length = 28 [6940] get_param_by_index_and_offset[50] sid_index = 12 offset = 412 buf = 0x91ed0708 length = 4 [6950] get_param_by_index_and_offset[50] sid_index = 10 offset = 128 buf = 0x91ed0704 length = 4 [6950] get_param_by_index_and_offset[50] sid_index = 12 offset = 408 buf = 0x91ed06e8 length = 4 [6960] boot_stage:0x9012 [6970] get_param_by_index_and_offset[50] sid_index = 12 offset = 412 buf = 0x91ed06e8 length = 4 [6970] data_stage:0x1234 [6980] RPMB is enable [6980] get_param_by_index_and_offset[50] sid_index = 12 offset = 424 buf = 0x91ed0708 length = 4 [6990] get_param_by_index_and_offset[50] sid_index = 0 offset = 76 buf = 0x91ed0728 length = 28 [7000] Failed to get parent node: fstab error: -1 [7000] ERROR: Cannot update fstab node [7010] Success [7010] Return value from recv_data: 14 [7020] Qseecom De-Init Done in Appsbl