Jump to content

JingPad A1 (jingpad-a1): Difference between revisions

From postmarketOS Wiki
Clevrpwn (talk | contribs)
Clevrpwn (talk | contribs)
Line 59: Line 59:


== How to enter flash mode ==
== How to enter flash mode ==
===Recovery===
* Turn off your device;
* Press Power button and after 1 second press also “Volume Down”;
* Hold both till JingPad logo appears;
* After the JingPad logo appears, release “Power” & “Volume-”
* Welcome to Recovery!
===Fastboot Mode===
* Turn off your device
* Turn off your device
* Boot JingPad A1 into recovery mode;
* Boot JingPad A1 into recovery mode;

Revision as of 13:35, 13 July 2022

This device is marked as not booting.
Jingling JingPad A1
CHANGE_ME
CHANGE_ME
Manufacturer Jingling
Name JingPad A1
Codename jingpad-a1
Released 2021
Hardware
Chipset Unisoc Tiger T7510
CPU 2.0 GHz ARM Cortex-A75
GPU PowerVR GM 9446
Display 2368x1728 AMOLED
Storage 128 GB / 256 GB
Memory 8 GB
Architecture aarch64
Software
Original software JingOS (Linux 4.14)
postmarketOS
Category testing
Pre-built images no
Unixbench Whet/Dhry score 6620.0


Contributors

  • R

Users owning this device

  • Clevrpwn (Notes: For pmOS development)
  • Shiishii (Notes: Daily driver Tab Ubuntu Touch)


How to enter flash mode

Recovery

  • Turn off your device;
  • Press Power button and after 1 second press also “Volume Down”;
  • Hold both till JingPad logo appears;
  • After the JingPad logo appears, release “Power” & “Volume-”
  • Welcome to Recovery!

Fastboot Mode

  • Turn off your device
  • Boot JingPad A1 into recovery mode;
  • Choose “Reboot into bootloader.”
  • After booting into bootloader mode, connect your device to a Linux desktop using the original USB Cable;
  • Open Terminal in the SDK location, check your device is connected with:
 sudo ./fastboot devices

Installation

See also