Jump to content

Orange Pi 4G-IoT: Difference between revisions

From postmarketOS Wiki
Cyrozap (talk | contribs)
How to enter flash mode: Added instructions for flashing using the Preloader
Cyrozap (talk | contribs)
See also: Added links
Line 50: Line 50:
* [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]
* [https://redmine.replicant.us/projects/replicant/wiki/GalaxyS2I9100 Replicant wiki page]
-->
-->
* [http://www.orangepi.org/Orange%20Pi%204G-IOT/ Product page]
* [http://www.orangepi.org/downloadresources/ Download page for the user manual, schematics, source code, Android image, etc.]

Revision as of 05:05, 11 May 2018

Shenzhen Xunlong Software Co., Ltd. Orange Pi 4G-IoT
CHANGE_ME
CHANGE_ME
Manufacturer Shenzhen Xunlong Software Co., Ltd.
Name Orange Pi 4G-IoT
Codename orange-pi-4g-iot
Released 2018
Hardware
Chipset MT6737M
CPU Cortex-A53
GPU Mali-T720 MP1
Display 720p
Storage 8GB
Memory 1GB DDR3
Software
Original software CHANGE_ME
postmarketOS
Category testing
Pre-built images no
Mainline no
Features
Flashing
No data
USB Networking
No data
Internal storage
No data
SD card
No data
Battery
No data
Screen
No data
Touchscreen
No data
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • cyrozap

Maintainer(s)

What works

What does not work

How to enter flash mode

Flashing using the Preloader

  1. Remove jumper J5. This will disable the USB hub on the board and enable you to connect the board to the host PC via USB. If you don't do this, USB errors will appear in dmesg.
  2. Start the MediaTek Smartphone Flash Tool (SPFT) as root.
  3. Select the scatter file and the partitions you want to flash.
  4. Click "Download".
  5. Plug the board into your computer via its micro-USB port.
  6. Wait for flashing to complete.
  7. If that fails, repeat steps 4-6 until it works.

Installation

See also