Samsung Galaxy Note 8.0 (Wi-Fi) (samsung-n5110): Difference between revisions
Appearance
added more info for osk-sdl |
Updated status on charging-sdl, osk-sdl and WiFi |
||
Line 25: | Line 25: | ||
* Weston including touch | * Weston including touch | ||
* Xfce4 (recommended) including touch and pen | * Xfce4 (recommended) including touch and pen | ||
* WiFi using the <code>firmware-samsung-i9305</code> | * WiFi using the <code>firmware-samsung-i9305</code> - but: NetworkManager does not work, see https://github.com/postmarketOS/pmbootstrap/issues/1461 | ||
* Bluetooth works partially as described for the [[Samsung_Galaxy_SIII_I747_(samsung-i747m)#Bluetooth|Galaxy SIII]] but the device is <code>/dev/ttySAC0</code> | * Bluetooth works partially as described for the [[Samsung_Galaxy_SIII_I747_(samsung-i747m)#Bluetooth|Galaxy SIII]] but the device is <code>/dev/ttySAC0</code> | ||
* Audio, see [[Audio#WM1811]] for more instructions. Both an pre-configured saved state as well as the ucm profiles are included. | * Audio, see [[Audio#WM1811]] for more instructions. Both an pre-configured saved state as well as the ucm profiles are included. | ||
* charging-sdl | |||
== What does not work == | == What does not work == | ||
* Bluetooth pairing with bluez5 (bluez4 is working, more on that soon) | * Bluetooth pairing with bluez5 (bluez4 is working, more on that soon) | ||
* [[osk-sdl]] | * [[osk-sdl]] - FDE most likely does not work as some kernel options are missing (can be easily fixed probably if FDE is desired). | ||
* GPS | * GPS | ||
* Camera | * Camera |
Revision as of 19:02, 27 May 2018
CHANGE_ME CHANGE_ME | |
Manufacturer | Samsung |
---|---|
Name | Samsung Galaxy Note 8.0 (Wi-Fi) |
Codename | samsung-n5110 |
Released | 2013 |
Hardware | |
Chipset | Samsung Exynos 4412 quad-core processor |
CPU | Quad-core Cortex-A9 1.6 GHz |
GPU | ARM Mali-400 MP |
Display | 1280x800 (189 PPI) TFT LCD |
Storage | 16 GB |
Memory | 2 GB |
Software | |
Original software | Android 4.4.2 KitKat |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- michitux
Maintainer(s)
- michitux
What works
- Weston including touch
- Xfce4 (recommended) including touch and pen
- WiFi using the
firmware-samsung-i9305
- but: NetworkManager does not work, see https://github.com/postmarketOS/pmbootstrap/issues/1461 - Bluetooth works partially as described for the Galaxy SIII but the device is
/dev/ttySAC0
- Audio, see Audio#WM1811 for more instructions. Both an pre-configured saved state as well as the ucm profiles are included.
- charging-sdl
What does not work
- Bluetooth pairing with bluez5 (bluez4 is working, more on that soon)
- osk-sdl - FDE most likely does not work as some kernel options are missing (can be easily fixed probably if FDE is desired).
- GPS
- Camera
- Sleep etc.
- poweroff on shutdown (
halt
) command - make sure you really turn the device off or your battery will be totally depleted. - 3D acceleration (plasma mobile is very slow)
How to enter flash mode
Hold power and volume down simultaneously.
Installation
Flashing of the kernel works with heimdall, installation on the system partition works at least with adb sideload
using TWRP (did not try heimdall). Installation on the sdcard should work, too (untested).
Mainline Kernel
There is currently no mainline kernel available but it should be possible to mainline this device. Have a look at Midas on Mainline for work on mainlining very similar devices.
See also
- #1219 Initial pull request
- GNU/Linux@N80XX XDA thread on porting GNU/Linux to the very similar Note 10.1.
- opensgn The Google Code repo of this port, includes audio configuration and some configuration regarding sleep