ASUS VivoTab RT: Difference between revisions
Appearance
m Remove n-android |
No edit summary |
||
Line 30: | Line 30: | ||
| status_camera = | | status_camera = | ||
| status_gps = P | | status_gps = P | ||
| status_nfc = P | |||
| status_mobiledata = | | status_mobiledata = | ||
| status_sms = | | status_sms = | ||
| status_calls = - | | status_calls = - | ||
| status_otg = Y | | status_otg = - | ||
| | | status_usba = Y | ||
| status_hdmidp = Y | |||
| status_keyboard = Y | |||
| status_touchpad = Y | |||
<!-- Sensors --> | <!-- Sensors --> | ||
| status_accel = Y | | status_accel = Y | ||
Line 41: | Line 45: | ||
| status_proximity = - | | status_proximity = - | ||
| status_hall = Y | | status_hall = Y | ||
| status_barometer = - | |||
| status_powersensor = - | |||
<!-- Misc --> | <!-- Misc --> | ||
| status_irtx = - | | status_irtx = - | ||
Line 126: | Line 132: | ||
| Y | | Y | ||
| Dock Keyboard | | Dock Keyboard | ||
| Dock keyboard and touchpad are both hid-over-i2c devices on hot- | | Dock keyboard and touchpad are both hid-over-i2c devices on hot-plug i2c line. Both are configured and work. | ||
|- | |- | ||
| P | | P |
Revision as of 15:27, 19 March 2023
This device is marked as not booting.
Manufacturer | ASUS |
---|---|
Name | VivoTab RT |
Codename | asus-tf600t |
Released | 2012 |
Hardware | |
Chipset | Nvidia Tegra 3 (T30) |
CPU | Quad-core 1.4 GHz Cortex-A9 |
GPU | NVIDIA ULP GeForce GPU 12 cores |
Display | 1366x768 Super IPS+ LCD |
Storage | 32/64 GB |
Memory | 2 GB |
Architecture | armv7 |
Software | |
Original software | Windows RT |
FOSS bootloader | yes |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
postmarketOS kernel | mainline grate |
Primary Bootloader |
Works |
---|---|
Mainline |
Works |
Internal Storage |
Works |
SD card |
Works |
USB Host |
Works |
USB Peripheral |
Works |
Display |
Broken |
Keyboard |
Broken |
Buttons |
Works |
This device is based on the Tegra 3. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
- Clamor
Installation
Currently only booting via fusee gelee is successful. It requires custom u-boot and a built fork of grate kernel. Check links below.
Hardware status (mainline)
Status | Hardware | Info |
---|---|---|
Y | Booting | Booting is available via loading custom U-Boot and kernel via fusee gelee. |
Y | U-Boot | U-Boot is fully functional, can be loaded and flashed instead of UEFI. |
N | Panel | Hydis HV101HD1 LCD SuperIPS+ HD panel through DSI-A port. Driver is made, DSI in T30 is not supported. |
Y | HDMI output | HDMI works, but output is 1080p due to Tegra 3 limitations. |
Y | Touchscreen | Used Atmel MXT1664 touchscreen. |
Y | USB | One full size USB 2.0 in dock or via 36 pin adapter. |
Y | SD cards | MicroSD card and full sized SD card (recognized as USB drive) in dock. |
Y | Internal memory | eMMC by SanDisk. SPI flash W25Q32 4MB. |
N | GPS | Broadcom GPS BCM4751 is used. BCM4751 GPS is commonly used in devices of this age, although it still does not have proper implementation (nor kernel, nor userspace); |
Y | WiFi | Uses Azurewave AW-NH665 BCM4330. |
Y | Bluetooth | Uses Azurewave AW-NH665 BCM4330B1. |
Y | GPIO keys | There are 3 keys on GPIO: Power, Volume up, Volume down.
Additionally GPIO-keys like are LID sensor and Audio dock line-out detect. |
Y | Vibro | VivoTab RT has GPIO based vibrator. |
Y | Dock Keyboard | Dock keyboard and touchpad are both hid-over-i2c devices on hot-plug i2c line. Both are configured and work. |
P | Battery/Charger | Driver is based on Texas Instruments bq24725 SMBus Charge Controller driver and GPIO charger but works through pad/dock Nuvoton NPCE795LA0BX embedded controller. Charging and charge level of pad battery is shown correctly, dock battery is not set yet. |
Y | PMIC | Transformers use Texas Instruments TPS659110 PMIC and TPS62361 core regulator. |
P | Sound | Sound codec is RT5640. Kernel driver and tegra_rt5640 driver are in grate master. |
Y | Thermal sensor | NCT1008 ON Semiconductor LM90 series thermometer. |
Y | Orientation sensors | Include Invensense mpu6050 IMU and Asahi-Kasei AK8975 3-axis digital compass. |
P | Light sensor | Driver for Capella CM3218 is present but initiation is failed. |
P | Torch MFD | Tablet has separate MFD for rear camera flash - TI TPS61050/61052 Boost Converter, and it works sometimes. |
P | NFC | NXP-44701 is bound, but not tested. |
N | Front camera | |
N | Rear camera | |
P | ULP GeForce | GPU Acceleration partially works. |