Vodafone 858 Smart (huawei-u8160): Difference between revisions
Appearance
Line 39: | Line 39: | ||
== Issues == | == Issues == | ||
Current assumption is that CPU is not supported by armhf architecture, so it won't boot [https://gitlab.com/postmarketOS/pmbootstrap/issues/1203#note_85244831] | * Current assumption is that CPU is not supported by armhf architecture, so it won't boot [https://gitlab.com/postmarketOS/pmbootstrap/issues/1203#note_85244831] | ||
* boot.img that can be booted using fastboot boot command is the one from stock device image. CyanogenMod boot.img fails to boot, but works when flashed to device. | |||
== See also == | == See also == |
Revision as of 10:27, 14 July 2018
![]() Vodafone 858 Smart | |
Manufacturer | Huawei |
---|---|
Name | Vodafone 858 Smart |
Codename | huawei-u8160 |
Released | 2011 |
Hardware | |
Chipset | Qualcomm MSM7225 |
CPU | 528 MHz ARM1136EJ-S |
GPU | - |
Display | 240x320 |
Storage | 512 MiB ROM |
Memory | 256 MiB RAM |
Software | |
Original software | Google Android 2.2 (Froyo) |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- joshas
Maintainer(s)
- joshas
What works
- Kernel compilation (2.6.32.61)
What does not work
- Everything else
How to enter flash mode
- While holding Volume down, press and hold Power for 5-10 seconds. There are no visual cues when fastboot loads.
Recovery mode
- While holding Volume up, press and hold Power button until recovery options appear.
Installation
- Install system partition to SD card
pmbootstrap install --no-fde --sdcard=/dev/sd?
- Boot kernel using
pmbootstrap flasher boot
Issues
- Current assumption is that CPU is not supported by armhf architecture, so it won't boot [1]
- boot.img that can be booted using fastboot boot command is the one from stock device image. CyanogenMod boot.img fails to boot, but works when flashed to device.