Huawei Maimang 5 (huawei-milan): Difference between revisions
Appearance
Ungeskriptet (talk | contribs) m Ungeskriptet moved page Huawei Maimang5(huawei-milan) to Huawei Maimang 5 (huawei-milan): Fix title |
Ungeskriptet (talk | contribs) m →Users owning this device: Fix typo and remove comments |
||
Line 67: | Line 67: | ||
== Users owning this device == | == Users owning this device == | ||
{{Device owners}} | {{Device owners}} | ||
== Fastboot Mode == | == Fastboot Mode == | ||
Revision as of 12:53, 10 July 2023
![]() Maimang 5 with lineageos | |
Manufacturer | Huawei |
---|---|
Name | Maimang 5 |
Codename | huawei-milan |
Released | 2016 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 625 (MSM8953) |
CPU | Octa-core (4x 2.0 GHz Cortex-a53) |
GPU | Adreno 506 |
Display | 1920x1080 |
Storage | 32GB/64GB |
Memory | 3GB/4GB |
Architecture | aarch64 |
Software | |
Original software | Android |
Original version | 6/7 |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | 6.x.x |
Unixbench Whet/Dhry score | 0.0 |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Keyboard |
No data |
Touchpad |
No data |
Stylus |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
IR TX |
No data |
IR RX |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
Ethernet |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB-A |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Power Sensor |
No data |
Contributors
- Bzy-080408
Users owning this device
Fastboot Mode
When you access Fastboot Mode, you can view information about the SoC and whether the bootloader (DEVICE STATE) is locked or unlocked.
While in Fastboot Mode you can use a computer to issue Fastboot commands to flash firmware to the device and manage the current slot that the bootloader is using to boot the operating system.
You can also use
+ to select an action from the menu at the top of the screen, and to select the action; which include powering off the device, continuing booting to the operating system, and restarting the bootloader which is useful if Fastboot commands are failing.Enter Fastboot Mode
With the device unplugged and powered off, hold
+ + . Once you feel the device power on, continue holding + until you reach Fastboot Mode.Unlock the bootloader
Before installing postmarketOS you have to unlock your bootloader.
If your device is not carrier locked
The following is all that's needed to unlock the bootloader:
- If you does not have the ,please buy it with e.g. Taobao or ask a friend to help you e.g. Coolapk or XDA
- Refer to "how to enter flash mode" above to get into fastboot mode, then re-attach your USB cable. Run the following command on your host:
fastboot oem unlock bootloader-code
- Read the message displayed on your device screen, once you're happy confirm the unlock. THIS WILL ERASE YOUR DEVICE.
Installation
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --fde