Jump to content

LeapFrog Leapster GS (leapfrog-lucy): Difference between revisions

From postmarketOS Wiki
Furret (talk | contribs)
No edit summary
Tags: mobile edit mobile web edit
Furret (talk | contribs)
No edit summary
Tags: mobile edit mobile web edit
Line 21: Line 21:
<!-- Features -->
<!-- Features -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->
| status_usbnet = <!-- USB networking does work? then put Y here and delete this comment -->
| status_usbnet = Y <!-- USB networking does work? then put Y here and delete this comment -->
| status_flashing = <!-- Flashing with "pmbootstrap flasher" works? Put Y here. It works the same for everything coming below. -->
| status_flashing = N <!-- Flashing with "pmbootstrap flasher" works? Put Y here. It works the same for everything coming below. -->
| status_touch = <!-- Touch screen is working? You can also answer these questions with P for partially. -->
| status_touch = P <!-- Touch screen is working? You can also answer these questions with P for partially. -->
| status_screen = <!-- The display is working? -->
| status_screen = Y <!-- The display is working? -->
| status_wifi = <!-- Wireless network works? -->
| status_wifi = - <!-- Wireless network works? -->
| status_xwayland = <!-- Showing X11 applications in a Wayland compositor (Weston, KWin, ...) works? -->
| status_xwayland = N <!-- Showing X11 applications in a Wayland compositor (Weston, KWin, ...) works? -->
| status_fde = <!-- When installing with full disk encryption, can you type in the password with the on screen keyboard? -->
| status_fde = N <!-- When installing with full disk encryption, can you type in the password with the on screen keyboard? -->
| status_mainline = <!-- Instead of a Linux kernel fork, it is possible to run mainline. -->
| status_mainline = N <!-- Instead of a Linux kernel fork, it is possible to run mainline. -->
| status_battery = <!-- Charging the battery with charging-sdl is possible -->
| status_battery = <!-- Charging the battery with charging-sdl is possible -->
| status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) -->
| status_3d = Y <!-- Hardware accelerated 3D graphics (e.g. with freedreno) -->
| status_audio = <!-- Using the device's speakers/headphone jack works -->
| status_audio = Y <!-- Using the device's speakers/headphone jack works -->
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol -->
| status_bluetooth = - <!-- It's possible to pair and use other devices via the bluetooth protocol -->
| status_camera = <!-- Taking photos and videos works. -->
| status_camera = P <!-- Taking photos and videos works. -->
| status_gps = <!-- The Global Positioning System sensor works.  -->
| status_gps = - <!-- The Global Positioning System sensor works.  -->
| status_mobiledata = <!-- Connecting to the Internet via cellular network. -->
| status_mobiledata = - <!-- Connecting to the Internet via cellular network. -->
| status_sms = <!-- Sending and receiving short messages works as intended. -->
| status_sms = - <!-- Sending and receiving short messages works as intended. -->
| status_calls = <!-- Talking to other people over the cellular network. -->
| status_calls = - <!-- Talking to other people over the cellular network. -->
| status_otg = <!-- USB-OTG adapters work, e.g. to connect an USB flash drive to the device -->
| status_otg = - <!-- USB-OTG adapters work, e.g. to connect an USB flash drive to the device -->
| status_nfc = <!-- Near-Field Communication (NFC) works -->
| status_nfc = - <!-- Near-Field Communication (NFC) works -->
<!-- Sensors -->
<!-- Sensors -->
| status_accel = <!-- The sensor that measures proper acceleration works -->
| status_accel = Y <!-- The sensor that measures proper acceleration works -->
| status_magnet = <!-- Magnetometer works -->
| status_magnet = <!-- Magnetometer works -->
| status_light = <!-- Ambient light sensor works -->
| status_light = <!-- Ambient light sensor works -->
Line 47: Line 47:
| status_hall = <!-- Hall effect sensor works -->
| status_hall = <!-- Hall effect sensor works -->
| status_barometer = <!-- Barometer works -->
| status_barometer = <!-- Barometer works -->
| status_powersensor = <!-- Power sensor works -->
| status_powersensor = P <!-- Power sensor works -->
<!-- Misc -->
<!-- Misc -->
| status_cameraflash = <!-- Camera flash/torch works -->
| status_cameraflash = - <!-- Camera flash/torch works -->
| status_keyboard = <!-- Keyboard works (Mark "-" if device doesn't have a keyboard) -->
| status_keyboard = - <!-- Keyboard works (Mark "-" if device doesn't have a keyboard) -->
| status_touchpad = <!-- Touchpad works (Usually applicable to laptops) -->
| status_touchpad = - <!-- Touchpad works (Usually applicable to laptops) -->
| status_usba = <!-- Full-sized USB-A port works (Usually applicable to SBCs and laptops) -->
| status_usba = - <!-- Full-sized USB-A port works (Usually applicable to SBCs and laptops) -->
| status_hdmidp = <!-- Video and audio output with HDMI or DisplayPort works -->
| status_hdmidp = - <!-- Video and audio output with HDMI or DisplayPort works -->
| status_irtx = <!-- Infrared (IR) transmit works -->
| status_irtx = - <!-- Infrared (IR) transmit works -->
| status_irrx = <!-- Infrared (IR) receive works -->
| status_irrx = - <!-- Infrared (IR) receive works -->
| status_stylus = <!--  -->
| status_stylus = Y <!--  -->
| status_haptics = <!--  -->
| status_haptics = - <!--  -->
| status_ethernet = <!--  -->
| status_ethernet = Y <!--  -->
| status_fossbootloader = yes <!-- Device has a free and open source bootloader -->
| status_fossbootloader = Y <!-- Device has a free and open source bootloader -->


<!-- optional for devices running u-boot
<!-- optional for devices running u-boot
| status_uboot = yes
| status_uboot = Y
| status_uboot_primary = partial
| status_uboot_primary = P
| status_uboot_secondary = partial
| status_uboot_secondary = P
| status_uboot_mainline = no
| status_uboot_mainline = N
| status_uboot_internalstorage = yes
| status_uboot_internalstorage = Y
| status_uboot_sd = no
| status_uboot_sd = N
| status_uboot_usbhost = no
| status_uboot_usbhost = N
| status_uboot_usbperipheral = yes
| status_uboot_usbperipheral = Y
| status_uboot_screen = yes
| status_uboot_screen = Y
| status_uboot_keyboard = no
| status_uboot_keyboard = N
| status_uboot_buttons = partial
| status_uboot_buttons = P
-->
-->


| booting = no <!-- The device is booting at all, can be yes/no *IMPORTANT* -->
| booting = no <!-- The device is booting at all, can be yes/no *IMPORTANT* -->
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" -->
| status = Yet to start work on<!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" -->
}}
}}



Revision as of 00:29, 5 September 2023

Warning WARNING: This device cannot run postmarketOS, as its architecture is unsupported.
This device is marked as not booting.
Status: Yet to start work on
LeapFrog LeapsterGS
CHANGE_ME
CHANGE_ME
Manufacturer LeapFrog
Name LeapsterGS
Codename leapfrog-leapstergs
Released 2012
Type change_me
Hardware
Chipset Nexell NXP 3200
CPU CHANGE_ME
GPU CHANGE_ME
Display CHANGE_ME
Storage CHANGE_ME
Memory CHANGE_ME
Architecture change_me
Software
Original software custom Angstrom based Linux distro
Original version 2.6.x
FOSS bootloader yes
postmarketOS
Category testing
Pre-built images no
Mainline no
postmarketOS kernel 3.4.24
Unixbench Whet/Dhry score 0.0


Contributors

Furret

Users owning this device

  • DCFUKSURMOM (Notes: Running RetroLeap, I've actually worked on the RetroLeap project and have 2 custom kernels on my github.)


How to enter flash mode

Installation

Use pmbootstrap to build your own installation image.

$ pmbootstrap init
$ pmbootstrap install


See also