Jump to content

LeapFrog Leapster GS (leapfrog-lucy): Difference between revisions

From postmarketOS Wiki
Furret (talk | contribs)
No edit summary
Tags: mobile edit mobile web edit
Furret (talk | contribs)
No edit summary
Tags: mobile edit mobile web edit
Line 7: Line 7:
| releaseyear = 2012
| releaseyear = 2012
| category = testing
| category = testing
| originalsoftware = custom Angstrom based Linux distro <!-- e.g. Android -->
| originalsoftware = custom Ångstrom based Linux distro <!-- e.g. Android -->
| originalversion = 2.6.x <!-- e.g. 11 for Android 11 -->
| originalversion = 2.6.x <!-- e.g. 11 for Android 11 -->
| pmoskernel = 3.4.24 <!-- Version of the kernel that postmarketOS is running -->
| pmoskernel = 3.4.24 <!-- Version of the kernel that postmarketOS is running -->
| chipset = Nexell NXP 3200 <!-- e.g. Qualcomm Snapdragon S1 (QSD8250) - see "Chipset names" section in Help:Device Page -->
| chipset = Nexell NXP3200 <!-- e.g. Qualcomm Snapdragon S1 (QSD8250) - see "Chipset names" section in Help:Device Page -->
| cpu = CHANGE_ME <!-- e.g. 1.0 GHz Scorpion -->
| cpu = CHANGE_ME <!-- e.g. 1.0 GHz Scorpion -->
| gpu = CHANGE_ME <!-- e.g. Adreno 200 -->
| gpu = CHANGE_ME <!-- e.g. Adreno 200 -->
Line 16: Line 16:
| storage = CHANGE_ME <!-- e.g. 512 MB -->
| storage = CHANGE_ME <!-- e.g. 512 MB -->
| memory = CHANGE_ME <!-- e.g. 576 MB -->
| memory = CHANGE_ME <!-- e.g. 576 MB -->
| architecture = armhf <!-- One of these: armhf, armv7, aarch64, riscv64, x86, x86_64 -->
| architecture = armhf (?) <!-- One of these: armhf, armv7, aarch64, riscv64, x86, x86_64 -->
| type = console <!-- e.g. handset, tablet -->
| type = console <!-- e.g. handset, tablet -->
| whet_dhry = 0.0 <!-- see Unixbench page on wiki -->
| whet_dhry = ? <!-- see Unixbench page on wiki -->
<!-- Features -->
<!-- Features -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->

Revision as of 00:35, 5 September 2023

Warning WARNING: This device cannot run postmarketOS, as its architecture is unsupported.
This device is marked as not booting.
Status: Yet to start work on
LeapFrog LeapsterGS
CHANGE_ME
CHANGE_ME
Manufacturer LeapFrog
Name LeapsterGS
Codename lf-leapstergs
Released 2012
Type console
Hardware
Chipset Nexell NXP3200
CPU CHANGE_ME
GPU CHANGE_ME
Display CHANGE_ME
Storage CHANGE_ME
Memory CHANGE_ME
Architecture armhf (?)
Software
Original software custom Ångstrom based Linux distro
Original version 2.6.x
FOSS bootloader yes
postmarketOS
Category testing
Pre-built images no
Mainline no
postmarketOS kernel 3.4.24
Unixbench Whet/Dhry score ?


Contributors

Furret

Users owning this device

  • DCFUKSURMOM (Notes: Running RetroLeap, I've actually worked on the RetroLeap project and have 2 custom kernels on my github.)


How to enter flash mode

Installation

Use pmbootstrap to build your own installation image.

$ pmbootstrap init
$ pmbootstrap install


See also