Jump to content

LeapFrog Leapster GS (leapfrog-lucy): Difference between revisions

From postmarketOS Wiki
Furret (talk | contribs)
No edit summary
Tags: mobile edit mobile web edit
Furret (talk | contribs)
No edit summary
Tags: mobile edit mobile web edit
Line 13: Line 13:
| cpu = 550 MHz Cortex-A9 <!-- e.g. 1.0 GHz Scorpion -->
| cpu = 550 MHz Cortex-A9 <!-- e.g. 1.0 GHz Scorpion -->
| gpu = CHANGE_ME <!-- e.g. Adreno 200 -->
| gpu = CHANGE_ME <!-- e.g. Adreno 200 -->
| display = CHANGE_ME <!-- e.g. 480x800 AMOLED -->
| display = 320x240 TFT <!-- e.g. 480x800 AMOLED -->
| storage = 2 GB <!-- e.g. 512 MB -->
| storage = 2 GB <!-- e.g. 512 MB -->
| memory = 128 MB (lower than N900!) <!-- e.g. 576 MB -->
| memory = 128 MB (lower than N900!) <!-- e.g. 576 MB -->

Revision as of 00:42, 5 September 2023

This device is marked as not booting.
Status: Yet to start work on
LeapFrog LeapsterGS
CHANGE_ME
CHANGE_ME
Manufacturer LeapFrog
Name LeapsterGS
Codename lf-leapstergs
Released 2012
Type console
Hardware
Chipset Nexell NXP3200
CPU 550 MHz Cortex-A9
GPU CHANGE_ME
Display 320x240 TFT
Storage 2 GB
Memory 128 MB (lower than N900!)
Architecture armv7
Software
Original software custom Ångstrom based Linux distro
Original version 2.6.x
FOSS bootloader yes
postmarketOS
Category testing
Pre-built images no
Mainline no
postmarketOS kernel 3.4.24
Unixbench Whet/Dhry score ?


Contributors

Furret

Users owning this device

  • DCFUKSURMOM (Notes: Running RetroLeap, I've actually worked on the RetroLeap project and have 2 custom kernels on my github.)


How to enter flash mode

Installation

Use pmbootstrap to build your own installation image.

$ pmbootstrap init
$ pmbootstrap install


See also