HTC One Mini 2 (htc-memul): Difference between revisions
Appearance
remove comments in device table |
Add some notes regarding lk2nd and mainline |
||
Line 51: | Line 51: | ||
Hold volume-down while booting the device to get into fastboot mode | Hold volume-down while booting the device to get into fastboot mode | ||
== Installation == | == Installation (mainline kernel) == | ||
Flash lk2nd to the boot partition. | |||
As of 2023-09-15 you need to compile lk2nd using both PRs [https://github.com/msm8916-mainline/lk2nd/pull/300 #300] and [https://github.com/msm8916-mainline/lk2nd/pull/299 #299]. Take a good look at the notes in the dts file on how to compile it, otherwise it will be quite broken! | |||
Also note that currently mainline kernel is relatively unstable and often crashes. Getting into debug-shell appears to work reliably though. | |||
== Installation (downstream kernel) == | |||
Installation via fastboot only works for the kernel / the boot partition. The rootfs has to be installed e.g. via the recovery zip and TWRP. | Installation via fastboot only works for the kernel / the boot partition. The rootfs has to be installed e.g. via the recovery zip and TWRP. | ||
Revision as of 20:37, 15 September 2023
![]() HTC One Mini 2 | |
Manufacturer | HTC |
---|---|
Name | One Mini 2 |
Codename | htc-memul |
Released | 2014 |
Hardware | |
Chipset | Qualcomm Snapdragon 400 (MSM8226) |
CPU | Quad-core 1.2 GHz Cortex-A7 |
GPU | Adreno 305 |
Display | 720 x 1280 |
Storage | 16 GB |
Memory | 1 GB |
Architecture | armv7 |
Software | |
Original software | Android 4.4.2 |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | 3.4.113 |
Flashing |
Partial |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- z3ntu
Maintainer(s)
- z3ntu
Users owning this device
How to enter flash mode
Hold volume-down while booting the device to get into fastboot mode
Installation (mainline kernel)
Flash lk2nd to the boot partition.
As of 2023-09-15 you need to compile lk2nd using both PRs #300 and #299. Take a good look at the notes in the dts file on how to compile it, otherwise it will be quite broken!
Also note that currently mainline kernel is relatively unstable and often crashes. Getting into debug-shell appears to work reliably though.
Installation (downstream kernel)
Installation via fastboot only works for the kernel / the boot partition. The rootfs has to be installed e.g. via the recovery zip and TWRP.
See also
- pmaports!641 Initial merge request
- TWRP image