ZTE Blade AF3 (zte-p731a20): Difference between revisions
Appearance
mNo edit summary |
m Specify type |
||
Line 15: | Line 15: | ||
| memory = 512 MB | | memory = 512 MB | ||
| architecture = armv7 | | architecture = armv7 | ||
| type = handset | |||
<!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | <!-- the following status_* questions should be answered with Y - yes, P - partial, N - no, or left blank (for untested or unknown) --> | ||
| status_usbnet = Y <!-- USB networking does work? then put Y here and delete this comment --> | | status_usbnet = Y <!-- USB networking does work? then put Y here and delete this comment --> |
Revision as of 07:19, 20 October 2023
![]() ZTE BLADE AF3 | |
Manufacturer | ZTE |
---|---|
Name | Blade AF3 |
Codename | zte-p731a20 |
Released | 2015 |
Type | handset |
Hardware | |
Chipset | Spreadtrum SC7731G |
CPU | 4x 1.2 GHz Cortex-A7 |
GPU | Mali-400 MP2 |
Display | 480х800 TFT |
Storage | 4 GB |
Memory | 512 MB |
Architecture | armv7 |
Software | |
Original software | Android 4.4.2, Linux kernel 3.10.17 |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | 3.10.17 |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Broken |
Audio |
Works |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
Broken |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- km2
Maintainer(s)
Users owning this device
How to enter flash mode
Installation
Vol up + Power (loading Recovery)
Connect usb cable and enter:
sudo adb start-server
When Recovery is fully loaded
adb reboot bootloader
When the fastboot logo appears on the phone
pmbootstrap flasher flash_rootfs pmbootstrap flasher flash_kernel