Jump to content

Xiaomi Redmi 5 (xiaomi-rosy): Difference between revisions

From postmarketOS Wiki
Hiprivsid (talk | contribs)
seems like who created this page didn't know what miui 7 used android 5
Bczeman (talk | contribs)
Add information about mainline support
Line 20: Line 20:
<!-- Features -->
<!-- Features -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->
<!-- the following status_* questions should be answered with Y for yes, P for partial, N for no, - for N/A or unavailable, or left blank for untested or unknown -->
| status_usbnet = <!-- USB networking does work? then put Y here and delete this comment -->
| status_usbnet = Y <!-- USB networking does work? then put Y here and delete this comment -->
| status_flashing = <!-- Flashing with "pmbootstrap flasher" works? Put Y here. It works the same for everything coming below. -->
| status_flashing = Y <!-- Flashing with "pmbootstrap flasher" works? Put Y here. It works the same for everything coming below. -->
| status_touch = <!-- Touch screen is working? You can also answer these questions with P for partially. -->
| status_touch = Y <!-- Touch screen is working? You can also answer these questions with P for partially. -->
| status_screen = <!-- The display is working? -->
| status_screen = Y<!-- The display is working? -->
| status_3d = <!-- Hardware accelerated 3D graphics (e.g. with freedreno) -->
| status_3d = Y <!-- Hardware accelerated 3D graphics (e.g. with freedreno) -->
| status_xwayland = <!-- Showing X11 applications in a Wayland compositor (Weston, KWin, ...) works? -->
| status_xwayland = Y <!-- Showing X11 applications in a Wayland compositor (Weston, KWin, ...) works? -->
| status_fde = <!-- When installing with full disk encryption, can you type in the password with the on screen keyboard? -->
| status_fde = Y<!-- When installing with full disk encryption, can you type in the password with the on screen keyboard? -->
| status_emmc = <!-- Internal storage can be accessed? -->
| status_emmc = Y<!-- Internal storage can be accessed? -->
| status_wifi = <!-- Wireless network works? -->
| status_wifi = Y<!-- Wireless network works? -->
| status_mainline = <!-- Instead of a Linux kernel fork, it is possible to run mainline. -->
| status_mainline = Y<!-- Instead of a Linux kernel fork, it is possible to run mainline. -->
| status_battery = <!-- Charging the battery with charging-sdl is possible -->
| status_battery = Y<!-- Charging the battery with charging-sdl is possible -->
| status_audio = <!-- Using the device's speakers/headphone jack works -->
| status_audio = P<!-- Using the device's speakers/headphone jack works -->
| status_bluetooth = <!-- It's possible to pair and use other devices via the bluetooth protocol -->
| status_bluetooth = Y<!-- It's possible to pair and use other devices via the bluetooth protocol -->
| status_camera = <!-- Taking photos and videos works. -->
| status_camera = P<!-- Taking photos and videos works. -->
| status_gps = <!-- The Global Positioning System sensor works.  -->
| status_gps = P<!-- The Global Positioning System sensor works.  -->
| status_mobiledata = <!-- Connecting to the Internet via cellular network. -->
| status_mobiledata = P<!-- Connecting to the Internet via cellular network. -->
| status_sms = <!-- Sending and receiving short messages works as intended. -->
| status_sms = Y<!-- Sending and receiving short messages works as intended. -->
| status_calls = <!-- Talking to other people over the cellular network. -->
| status_calls = P<!-- Talking to other people over the cellular network. -->
| status_otg = <!-- USB-OTG adapters work, e.g. to connect an USB flash drive to the device -->
| status_otg = Y<!-- USB-OTG adapters work, e.g. to connect an USB flash drive to the device -->
<!-- Sensors -->
<!-- Sensors -->
| status_accel = <!-- The sensor that measures proper acceleration works -->
| status_accel = <!-- The sensor that measures proper acceleration works -->
Line 53: Line 53:
| status_touchpad = <!-- Touchpad works (Usually applicable to laptops) -->
| status_touchpad = <!-- Touchpad works (Usually applicable to laptops) -->
| status_usba = <!-- Full-sized USB-A port works (Usually applicable to SBCs and laptops) -->
| status_usba = <!-- Full-sized USB-A port works (Usually applicable to SBCs and laptops) -->
| status_sdcard <!-- SD/UFS card works -->
| status_sdcard = Y<!-- SD/UFS card works -->
| status_haptics = <!--  -->
| status_haptics = <!--  -->
| status_fossbootloader = Y
| status_fossbootloader = Y
Line 70: Line 70:
-->
-->


| booting = no <!-- The device is booting at all, can be yes/no *IMPORTANT* -->
| booting = yes <!-- The device is booting at all, can be yes/no *IMPORTANT* -->
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" -->
| status = <!-- Text displayed in the "not booting" table on the Devices page , e.g "kernel compiles, doesn't boot" -->
}}
}}

Revision as of 18:25, 13 May 2024

Xiaomi Redmi 5
Manufacturer Xiaomi
Name Redmi 5
Codename rosy
Released 2017
Type handset
Hardware
Chipset Qualcomm Snapdragon 450 (MSM8953)
CPU 8x 1.8Hz – Cortex-A53
GPU Adreno 506
Display 5.7 1440x720 IPS
Storage 16/32 GB
Memory 2/3/4 GB
Architecture aarch64
Software
Original software Android (MIUI)
Original version 7.1 (MIUI 9)
FOSS bootloader yes
postmarketOS
Category testing
Pre-built images no
Mainline yes
postmarketOS kernel N/A
Features
Flashing
Works
USB Networking
Works
Internal storage
Works
SD card
Works
Battery
Works
Screen
Works
Touchscreen
Works
Keyboard
No data
Touchpad
No data
Multimedia
3D Acceleration
Works
Built-in DVB
No data
Audio
Partial
Camera
Partial
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
Works
GPS
Partial
NFC
No data
Modem
Calls
Partial
SMS
Works
Mobile data
Partial
Miscellaneous
FDE
Works
USB-A
No data
USB OTG
Works
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data
Power Sensor
No data


Status

Got lk2nd running.

Contributors

Users owning this device

  • Hiprivsid (Notes: Cracked screen, but phone works fine)
  • Lordkaczuha (Notes: my old phone. has extremely poor WiFi Bluetooth and cellular reception. 3/32 variant.)
  • RobusTetus (Notes: Daily driver)
  • Sasha0552 (Notes: No screen)
  • WorryNori (Notes: Broken Touchscreen)


How to enter flash mode

Installation

See also