Jolla Phone (jolla-sbj): Difference between revisions
Appearance
m CmdrWgls moved page Jolla-sbj (Jolla phone) to Jolla Phone (jolla-sbj): Device title format change. |
Added infobox. |
||
Line 1: | Line 1: | ||
[[Category:Unsupported Devices]] | [[Category:Unsupported Devices]] | ||
=== Contributors | [[Category:Devices]] | ||
{{Infobox device | |||
| manufacturer = Jolla | |||
| name = Phone (?) | |||
| codename = sbj | |||
| image = File:Jolla Phone.jpg | |||
| imagecaption = Jolla Phone | |||
| releaseyear = 2013 | |||
| originalsoftware = Sailfish 1 | |||
| cpu = Qualcomm Snapdragon 400 | |||
| gpu = Adreno 305 | |||
| storage = 16GB | |||
| display = 540x960 IPS | |||
| memory = 1GB | |||
}} | |||
== Contributors == | |||
* MartijnBraam | * MartijnBraam | ||
== What works == | |||
* Compiling the kernel from the jolla sources which should provide everything to run wayland since that's what sailfish uses | * Compiling the kernel from the jolla sources which should provide everything to run wayland since that's what sailfish uses | ||
== What does not work == | |||
* Flashing, still need to find the correct offsets | * Flashing, still need to find the correct offsets | ||
== Flashing mode == | |||
The jolla does use fastboot from the mer project instead of android. To enter fastboot shut down the device, then plug in the USB lead while holding down volume down. | The jolla does use fastboot from the mer project instead of android. To enter fastboot shut down the device, then plug in the USB lead while holding down volume down. | ||
== Links == | |||
* [https://github.com/postmarketOS/pmbootstrap/tree/device-jolla-sbj/aports/device-jolla-sbj Device package] | * [https://github.com/postmarketOS/pmbootstrap/tree/device-jolla-sbj/aports/device-jolla-sbj Device package] |
Revision as of 04:14, 5 September 2017
![]() Jolla Phone | |
Manufacturer | Jolla |
---|---|
Name | Phone (?) |
Codename | sbj |
Released | 2013 |
Hardware | |
CPU | Qualcomm Snapdragon 400 |
GPU | Adreno 305 |
Display | 540x960 IPS |
Storage | 16GB |
Memory | 1GB |
Software | |
Original software | Sailfish 1 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- MartijnBraam
What works
- Compiling the kernel from the jolla sources which should provide everything to run wayland since that's what sailfish uses
What does not work
- Flashing, still need to find the correct offsets
Flashing mode
The jolla does use fastboot from the mer project instead of android. To enter fastboot shut down the device, then plug in the USB lead while holding down volume down.