Motorola Moto E5 Plus (motorola-hannah): Difference between revisions
Appearance
No edit summary |
No edit summary |
||
Line 8: | Line 8: | ||
| originalsoftware = Android | | originalsoftware = Android | ||
| originalversion = 8.0 | | originalversion = 8.0 | ||
| chipset = Qualcomm Snapdragon | | chipset = Qualcomm Snapdragon 425 (MSM8917) | ||
| cpu = 4x 1.40 GHz ARM Cortex-A53 | | cpu = 4x 1.40 GHz ARM Cortex-A53 | ||
| gpu = Adreno 308 | | gpu = Adreno 308 |
Revision as of 12:16, 27 January 2025
This device is supported as part of a generic port. Refer to Generic MSM89x7 (qcom-msm89x7) for installation instructions and more information. |
Manufacturer | Motorola |
---|---|
Name | Moto E5 Plus |
Codename | motorola-hannah |
Released | 2018 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 425 (MSM8917) |
CPU | 4x 1.40 GHz ARM Cortex-A53 |
GPU | Adreno 308 |
Display | 720x1440 |
Storage | 32 GB |
Memory | 3 GB |
Architecture | aarch64 |
Software | |
Original software | Android |
Original version | 8.0 |
FOSS bootloader | lk2nd |
postmarketOS | |
Category | testing |
Pre-built images | no |
Generic port | Generic MSM89x7 (qcom-msm89x7) |
Flashing |
Partial |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Keyboard |
No data |
Touchpad |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
IR TX |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Power Sensor |
No data |
This device is based on the Snapdragon 430. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
Users owning this device
- Lordkaczuha (Notes: has a slightly cracked screen but still works. NFC and fingerprint reader are both completely missing, while power and volume buttons barely work. 2/16 variant.)
- Operachi (Notes: PostmarketOS)
Note
PostmarketOS at the moment can boot via downstream kernel and motorola-james port (with motorola-hannah kernel config).
LK2nd
It works and you need build it with:
make TOOLCHAIN_PREFIX=arm-none-eabi- lk2nd-msm8952 LK2ND_QCDTBS="msm8937-mtp.dtb" LK2ND_COMPATIBLE="motorola,hannah"
UART
Some UART output: https://pastebin.com/ZPQYNqCy#XELZYRyi
UART Cable:
UART Schematics:
UART Localization:
Ground Cable:
Ground Localization: