Samsung Galaxy A12 Nacho (samsung-a127f): Difference between revisions
Appearance
Add image; Update boot status |
m Famfo moved page Samsung Galaxy A12s (samsung-a127f) to Samsung Galaxy A12 Nacho (samsung-a127f): Misspelled title |
(No difference)
|
Revision as of 21:34, 18 February 2025
![]() A127F booting to a kernel panic, 8 cores are recognized | |
Manufacturer | Samsung |
---|---|
Name | Galaxy A12 Nacho |
Codename | samsung-a127f |
Model | SM-A127F/DSN, SM-A127F/DS, SM-A127F, SM-A127M, SM-A127U |
Released | 2021 |
Type | handset |
Hardware | |
Chipset | Samsung Exynos 850 |
CPU | 4x2.0 GHz Cortex-A55 & 4x2.0 GHz Cortex-A55 |
GPU | Mali-G52 |
Display | 720 x 1600 LCD |
Storage | 32/64/128GB |
Memory | 3/4GB |
Architecture | aarch64 |
Software | |
Original software | Android (One UI) |
Original version | 11 |
FOSS bootloader | partial |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
postmarketOS kernel | 6.14.0-rc2 |
Unixbench Whet/Dhry score | 0.0 |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
Broken |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
IR TX |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Haptics |
No data |
Power Sensor |
No data |
Contributors
Users owning this device
Current status
- ported uniLoader
- wrote an initial device tree
- loads into initramfs
- crashes in initramfs on clock init
How to enter flash mode
Press both volume up and volume down while booting the device to enter Odin.
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernel
to flash the kernel - Run
pmbootstrap flasher flash_rootfs