FriendlyElec CM3588 (friendlyelec-cm3588): Difference between revisions
Appearance
Wiktorpyk6 (talk | contribs) No edit summary |
Wiktorpyk6 (talk | contribs) No edit summary |
||
Line 15: | Line 15: | ||
| gpu = Mali‑G610 MP4 | | gpu = Mali‑G610 MP4 | ||
| display = 2x HDMI, MIPI | | display = 2x HDMI, MIPI | ||
| storage = eMMC, microSD | | storage = eMMC, microSD, NVMe | ||
| memory = 4GB/8GB/16GB LPDDR4X @ 2133MHz, 32GB LPDDR5 @ 2400MHz | | memory = 4GB/8GB/16GB LPDDR4X @ 2133MHz, 32GB LPDDR5 @ 2400MHz | ||
| architecture = aarch64 | | architecture = aarch64 |
Revision as of 17:29, 20 February 2025
This device is marked as not booting.
![]() FriendlyElec CM3588 Board | |
Manufacturer | FriendlyElec |
---|---|
Name | CM3588 |
Codename | friendlyelec-cm3588 |
Model | CM3588 |
Released | 2022 |
Type | embedded |
Hardware | |
Chipset | Rockchip RK3588 |
CPU | 4x Cortex‑A76 @ 2.4GHz, 4x Cortex‑A55 @ 1.8GHz |
GPU | Mali‑G610 MP4 |
Display | 2x HDMI, MIPI |
Storage | eMMC, microSD, NVMe |
Memory | 4GB/8GB/16GB LPDDR4X @ 2133MHz, 32GB LPDDR5 @ 2400MHz |
Architecture | aarch64 |
Software | |
Original version | 5.x (Linux kernel) |
postmarketOS | |
Category | Embedded |
postmarketOS kernel | 6.x.x |
Contributors
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernel
to flash the kernel - Run
pmbootstrap flasher flash_rootfs