Fydetab Duo (fyde-fydetabduo)
Appearance
CHANGE_ME CHANGE_ME | |
Manufacturer | Fyde Innovations LTD |
---|---|
Name | FydeTab Duo |
Codename | fyde-fydetabduo |
Model | FydeTabDuo |
Released | 2024 |
Type | convertible |
Hardware | |
Chipset | Rockchip RK3588S |
CPU | 4x Cortex-A76 + 4x Cortex-A55 |
GPU | Arm Mali-G610 MP4 “Odin” GPU |
Display | 2560x1600 IPS display |
Storage | 256GV eMMC SSD |
Memory | 8GB LPDDR4X |
Architecture | aarch64 |
Software | |
Original software | FydeOS |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | 6.2 |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Keyboard |
No data |
Touchpad |
No data |
Stylus |
No data |
Multimedia | |
3D Acceleration |
No data |
Built-in DVB |
No data |
Audio |
No data |
Camera |
No data |
IR TX |
No data |
IR RX |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
SATA/eSATA |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Power Sensor |
No data |
Contributors
Users owning this device
- Techwizz (Notes: Nice tablet)
- WhyNotHugo (Notes: Slowly working on a port)
How to enter flash mode
As per the official documentation, the device can be booted into Loader Mode with the following sequence:
- Press and hold the VolUp button
- Press and release the Power button
The software bootloader handles this combination of keys. If the device is flashed with an image that fails to boot, this combination will no longer work. In such circumstances, the device needs to be recovered:
- Remove the screen by gently sliding a plastic pick between the screen and the frame. Take care; the screen's flex is rather short and must be handled delicately.
- Disconnect the battery to avoid accidental electrical damage.
- Press and hold the MASKROM button on the PCB.
- Connect the USB cable to the PC (while still holding down the button).
Installation
Use pmbootstrap to build your own installation image.
Booting
The Fydetab Duo boots from the eMMC SDD by default. It expects the OS to be packaged as a FIT Image which contains a bootloader image as well as a collection of device trees.