Jump to content

HTC Wildfire (htc-buzz)

From postmarketOS Wiki
Revision as of 11:10, 17 December 2023 by Exkc (talk | contribs)
Warning WARNING: This device cannot run postmarketOS, as its architecture is unsupported.
This device is unsupported by postmarketOS (most likely due to its architecture being unsupported, or limited system resources).

Reason: Qualcomm MSM7225 - ARMv6 without FPU/VFP #1203
HTC Wildfire
Manufacturer HTC
Name Wildfire
Codename htc-buzz
Released 2010
Hardware
Chipset Qualcomm Snapdragon S1 (MSM7225)
CPU 528 MHz ARM 11
GPU No
Display 240x320
Storage 512 MB
Memory 384 MB
Architecture armv6
Software
Original software Android
Original version 2.1
postmarketOS
Category testing
Pre-built images no


Contributors

  • feinerer

Maintainer(s)

  • feinerer

What works

  • Kernel compilation

What does not work

  • Everything else

How to enter flash mode

Hold the Volume Down button, and then press the Power button. Choose FASTBOOT.

Installation

Note Flashing the partitions does not work yet, so you will need an SD card.
  • Install everything using an SD card pmbootstrap install --sdcard=/dev/sd?
  • Insert the SD-Card on the device
  • Enter flash mode
  • Boot kernel using pmbootstrap flasher boot

See also

  • #1203 HTC Wildfire status report