Jump to content

Lark FreeMe 70.2S (lark-freeme-70-2s)

From postmarketOS Wiki
Revision as of 00:04, 23 March 2021 by JuniorJPDJ (talk | contribs) (minimal info)
This device is marked as not booting.
lark Lark FreeMe 70.2S
CHANGE_ME
CHANGE_ME
Manufacturer lark
Name Lark FreeMe 70.2S
Codename lark-freeme-70-2s
Released 2012
Hardware
Chipset [[Allwinner A10]]
CPU 1x 1.0GHz Cortex-A8
GPU Mali-400 MP1
Display 800x480
Storage 4 GB
Memory 512 MB
Architecture armv7
Software
Original software Android 2.3
postmarketOS
Category testing
Pre-built images no
postmarketOS kernel 3.x.x
Unixbench Whet/Dhry score 0.0

Contributors

Maintainer(s)


How to enter flash mode

Flashing postmarketOS to NAND memory inside this device is not supported.

Installation

Just flash it on sdcard using pmbootstrap:

$ pmbootstrap install --sdcard /dev/YOUR_SDCARD_DEVICE

eg.

$ pmbootstrap install --sdcard /dev/mmcblk0

Booting

Put your sdcard inside tablet and it turn on. U-Boot screen should show up and boot should proceed.

See also