Lark FreeMe 70.2S (lark-freeme-70-2s)
Appearance
This device is marked as not booting.
CHANGE_ME CHANGE_ME | |
Manufacturer | lark |
---|---|
Name | Lark FreeMe 70.2S |
Codename | lark-freeme-70-2s |
Released | 2012 |
Hardware | |
Chipset | [[Allwinner A10]] |
CPU | 1x 1.0GHz Cortex-A8 |
GPU | Mali-400 MP |
Display | 800x480 |
Storage | 4 GB |
Memory | 512 MB |
Architecture | armv7 |
Software | |
Original software | Android 2.3 |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | 3.x.x |
Unixbench Whet/Dhry score | 0.0 |
Contributors
Maintainer(s)
How to enter flash mode
Flashing postmarketOS to NAND memory inside this device is not supported.
Installation
Just flash it on sdcard using pmbootstrap:
$ pmbootstrap install --sdcard /dev/YOUR_SDCARD_DEVICE
eg.
$ pmbootstrap install --sdcard /dev/mmcblk0
Booting
Put your sdcard inside tablet and it turn on. U-Boot screen should show up and boot should proceed.