Motorola Moto G7 Power (motorola-ocean)
![]() | |
Manufacturer | Motorola |
---|---|
Name | Moto G7 Power |
Codename | motorola-ocean |
Released | 2019 |
Hardware | |
Chipset | Qualcomm SDM632 Snapdragon 632 |
CPU |
4x Kryo 250 Gold @ 1.8GHz 4x Kryo 250 Silver @ 1.8GHz |
GPU | Adreno 506 |
Display | 1520x720 IPS |
Storage | 32/64GB |
Memory | 3/4GB |
Architecture | aarch64 |
Software | |
Original software | Android 9.0/10.0 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
Broken |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Works |
Audio |
Partial |
Camera |
Broken |
Camera Flash |
No data |
Connectivity | |
WiFi |
Works |
Bluetooth |
Works |
GPS |
No data |
Modem | |
Calls |
Partial |
SMS |
Partial |
Mobile data |
Broken |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
Broken |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- gavodavo aka Ultracoolguy
Maintainer(s)
- gavodavo aka Ultracoolguy
Users owning this device
How to enter flash mode
1. The easiest way is to turn off your phone and press the Power button and the Volume Up button at the same time.
Installation
1. Install lk2nd. You'll need to clone Ultracoolguy/lk2nd. Follow the instructions for building, and flash build-msm8953-secondary/lk2nd.img like you would with any boot image.
2. Boot into it. While the "Bootloader is unlocked" warning appears, press Volume Down. A Tux logo and a screen should appear.
3. Do the installation steps you would find at Installation guide. Flash all the necessary stuff(make sure to install the kernel inside lk2nd!) .
4. Select "START" in lk2nd, and let your device do it's thing. Hopefully a SSH connection will get open eventually :)
Audio
From the kernel side everything is working, but on upstream a ucm configuration is needed as of this moment. You can copy from this MR to msm8916-mainline/alsa-ucm-conf or wait until it gets merged and the package updated.
Modem
While with a little effort you can make modem start and work, like Qualcomm Snapdragon 450/625/626/632 (MSM8953) mentions there's only an experimental fork of ofono working with it. ModemManager recently accepted a MR for supporting QRTR modems(that's us!), but it seems to work only on SDM845 phones.
If you still want modem for calls and messages ask gavodavo on Matrix in the mean time! |
See also
- pmaports!1470 Initial merge request
- Device package
- Kernel package