Jump to content

Poin2 Chromebook 11 (google-veyron-jerry)

From postmarketOS Wiki
Revision as of 13:34, 7 July 2021 by Tvall (talk | contribs)
Google Veyron_jerry chromebook (aka Hisense c11, poin2 chromebook 11, etc)
CHANGE_ME
CHANGE_ME
Manufacturer Google
Name Veyron_jerry chromebook (aka Hisense c11, poin2 chromebook 11, etc)
Codename google-veyron-jerry
Released 2015
Hardware
Chipset RK3288
CPU 1.8ghz cortex-a17 x4
GPU Mali-T760 MP4
Display 1366x768
Storage 16GB EMMC
Memory 2 GB
Architecture armv7
Software
Original software ChromeOS
postmarketOS
Category testing
Pre-built images no
Mainline yes
Unixbench Whet/Dhry score 1921.2
Features
Flashing
No data
USB Networking
No data
Internal storage
No data
SD card
No data
Battery
Works
Screen
Works
Touchscreen
No data
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • tvall

Maintainer(s)

Users owning this device

  • Rainbyte (Notes: OS: empty ; Model: Positivo BGH Chromebook G1160 2G+16G)


Installation

Device comes stock with coreboot and depthcharge. depthcharge is annoying to work with in my opinion, so I recommend working around it to get u-boot loading somehow so you have a sane normal bootloader. There are two ways to accomplish this, either flashing u-boot to spi and getting rid of depthcharge completely, or chainloading u-boot from depthcharge.

chainloading

Chainloading is safest with no chance of bricks, if something goes wrong you can just restore using the chromeos recovery image. will write instructions later

u-boot on spi

My preferred method, but with some chance of brick.

git clone https://github.com/u-boot/u-boot

make -j8 O=b/chromebook_jerry CROSS_COMPILE=arm-none-eabi- chromebook_jerry_defconfig all

./b/chromebook_jerry/tools/mkimage -n rk3288 -T rkspi -d b/chromebook_jerry/spl/u-boot-spl.bin spl.bin && dd if=spl.bin of=spl-out.bin bs=128K conv=sync && cat spl-out.bin b/chromebook_jerry/u-boot-dtb.img >out.bin && dd if=out.bin of=out.bin.pad bs=4M conv=sync


copy out.bin.pad to chromebook


sudo flashrom -p linux_mtd -w out.bin.pad

See also