Jump to content

Poin2 Chromebook 11 (google-veyron-jerry)

From postmarketOS Wiki
Note This device is known under different names, such as Hisense C11, Poin2 Chromebook 11 and others.
Google Veyron Jerry Chromebook
Veyron Jerry Chromebook
Veyron Jerry Chromebook
Manufacturer Google
Name Veyron Jerry Chromebook
Codename google-veyron-jerry
Released 2015
Hardware
Chipset RK3288
CPU 1.8ghz cortex-a17 x4
GPU Mali-T760 MP4
Display 1366x768
Storage 16GB EMMC
Memory 2 GB
Architecture armv7
Software
Original software ChromeOS
postmarketOS
Category testing
Pre-built images no
Mainline yes
postmarketOS kernel 5.13
Unixbench Whet/Dhry score 1921.2
Features
USB Networking
No data
Internal storage
No data
SD card
No data
Battery
Works
Screen
Works
Multimedia
3D Acceleration
Works
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • tvall

Maintainer(s)

Users owning this device

  • Rainbyte (Notes: OS: empty ; Model: Positivo BGH Chromebook G1160 2G+16G)


Installation

Device comes stock with coreboot and depthcharge. depthcharge is annoying to work with in my opinion, and the version included on this device does not support loading an initramfs. so the first step is to get a bootloader that works properly and ideally doesnt get in out way loading for us. it should be possible to build a new version of coreboot+depthcharge, but there is not much documentation and what is there is old and broken. u-boot should be able to replace coreboot and depthcharge, but i havent had luck getting it to work properly standalone, so our best option is chainloading an older version from depthcharge.

chainloading

Chainloading is safest with no chance of bricks, if something goes wrong you can just restore using the chromeos recovery image. will write instructions later

info on chainloading u-boot https://github.com/hexdump0815/u-boot-chainloading-for-arm-chromebooks/blob/master/readme.cbr

the goal is to write uboot.kpart.cbr-jerry to one of the kern partitions and set it bootable.

If you are stating from a fresh ChromeOS install:

1. enable developer mode (hold esc+refresh then hit power. hit ctrl+d at recovery screen)

2. connect to wifi.

3. Ctrl+alt+F2 (right arrow)

4. login, username should be chronos

5. wget https://github.com/hexdump0815/imagebuilder/releases/download/210613-03/uboot.kpart.cbr-jerry

6. sudo dd if=uboot.kpart.cbr-jerry of=/dev/mmcblk0p4

7. sudo cgpt add -i 4 -S 1 -T 15 -P 15 /dev/mmcblk0

8. reboot. you should now boot to u-boot after the dev-mode warning screen and can boot postmarketos from sd.

u-boot on spi

preferred method, but with some chance of brick. can't seem to get kernel to boot properly, ignore this for now.

$ git clone https://github.com/u-boot/u-boot

$ make -j8 O=b/chromebook_jerry CROSS_COMPILE=arm-none-eabi-    chromebook_jerry_defconfig all

$ ./b/chromebook_jerry/tools/mkimage -n rk3288 -T rkspi  -d b/chromebook_jerry/spl/u-boot-spl.bin spl.bin &&    dd if=spl.bin of=spl-out.bin bs=128K conv=sync &&    cat spl-out.bin b/chromebook_jerry/u-boot-dtb.img >out.bin &&    dd if=out.bin of=out.bin.pad bs=4M conv=sync

// copy out.bin.pad to chromebook
$ sudo flashrom -p linux_mtd -w out.bin.pad

See also