Jump to content

Huawei Watch (huawei-sturgeon)

From postmarketOS Wiki
Revision as of 20:01, 19 September 2021 by Timbz (talk | contribs)
Huawei Watch
Huawei Watch running the weston demo
Huawei Watch running the weston demo
Manufacturer Huawei
Name Watch
Codename huawei-sturgeon
Released 2015
Hardware
Chipset Qualcomm APQ8026 Snapdragon 400
CPU Quad-core 1.2 GHz Cortex-A7
GPU Adreno 305
Display 400x400 AMOLED
Storage 4 GB
Memory 512 MB
Architecture armv7
Software
Original software Android Wear
postmarketOS
Category testing
Pre-built images no
postmarketOS kernel 3.10.40
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • Timbz

Users owning this device


How to enter flash mode

  1. Hold down the power button.
  2. The watch will reboot, keep holding the power button.
  3. Wait for the first vibration, release the power button and then immediately tab it again.

Installation

First build the image:

$ pmbootstrap init
$ pmbootstrap install

Then in order to flash it put your device in fastboot mode, and put it on the dock. Then do:

$ pmbootstrap flasher flash_rootfs
$ pmbootstrap flasher flash_kernel

You can then either reboot or run fastboot continue to boot into postmarketOS.

See also