Samsung Galaxy Note 8.0 (Wi-Fi) (samsung-n5110)
Appearance
CHANGE_ME CHANGE_ME | |
Manufacturer | Samsung |
---|---|
Name | Samsung Galaxy Note 8.0 (Wi-Fi) |
Codename | samsung-n5110 |
Released | 2013 |
Hardware | |
Chipset | Samsung Exynos 4412 quad-core processor |
CPU | Quad-core Cortex-A9 1.6 GHz |
GPU | ARM Mali-400 MP |
Display | 1280x800 (189 PPI) TFT LCD |
Storage | 16 GB |
Memory | 2 GB |
Software | |
Original software | Android 4.4.2 KitKat |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- michitux
Maintainer(s)
- michitux
What works
- Weston including touch
- Xfce4 (recommended) including touch and pen
- WiFi using the
firmware-samsung-i9305
- Bluetooth works partially as described for the Galaxy SIII but the device is
/dev/ttySAC0
- Audio, see Audio#WM1811 for more instructions. Both an pre-configured saved state as well as the ucm profiles are included.
What does not work
- Bluetooth pairing
- GPS
- Camera
- Sleep etc.
- poweroff on shutdown (
halt
) command - make sure you really turn the device off or your battery will be totally depleted. - 3D acceleration (plasma mobile is very slow)
How to enter flash mode
Hold power and volume down simultaneously.
Installation
Flashing of the kernel works with heimdall, installation on the system partition works at least with adb sideload
using TWRP (did not try heimdall). Installation on the sdcard should work, too (untested).
See also
- #1219 Initial pull request
- GNU/Linux@N80XX XDA thread on porting GNU/Linux to the very similar Note 10.1.
- opensgn The Google Code repo of this port, includes audio configuration and some configuration regarding sleep