HTC Wildfire (htc-buzz)
Appearance
Manufacturer | HTC |
---|---|
Name | Wildfire |
Codename | buzz |
Released | 2010 |
Hardware | |
Chipset | Qualcomm MSM7225 Snapdragon S1 |
CPU | 528 MHz ARM 11 |
GPU | No |
Display | 240x320 |
Storage | 512 MB |
Memory | 384 MB |
Software | |
Original software | Android 2.1 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | no |
Flashing |
No data |
---|---|
USB Networking |
No data |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
No data |
Touchscreen |
No data |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
No data |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- feinerer
Maintainer(s)
- feinerer
What works
- Kernel compilation
What does not work
- Everything else
How to enter flash mode
Hold the Volume Down button, and then press the Power button. Choose FASTBOOT.
Installation
Flashing the partitions does not work yet, so you will need an SD card. |
- Install everything using an SD card
pmbootstrap install --no-fde --sdcard=/dev/sd?
- Insert the SD-Card on the device
- Enter flash mode
- Boot kernel using
pmbootstrap flasher boot
See also
- #1203 HTC Wildfire status report