OnePlus 3 (oneplus-oneplus3)
Appearance
File:oneplus-oneplus3.jpg | |
Manufacturer | OnePlus |
---|---|
Name | 3 |
Codename | oneplus-oneplus3 |
Released | 2016 |
Hardware | |
Chipset | Qualcomm MSM8996 Snapdragon 820 |
CPU |
Kryo 2x2.2 GHz 2x1.6 Ghz |
GPU | Adreno 530 |
Display | 1080x1920 AMOLED |
Storage | 64 GB |
Memory | 6 GB |
Architecture | aarch64 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Flashing |
Works |
---|---|
USB Networking |
Broken |
Internal storage |
No data |
SD card |
No data |
Battery |
Broken |
Screen |
Broken |
Touchscreen |
Broken |
Multimedia | |
3D Acceleration |
Broken |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
Bluetooth |
Broken |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
This device is based on the Snapdragon 820. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
Maintainer(s)
Users owning this device
- Bczeman
- Bdju (Notes: partially broken/disassembled)
- Caesarhao (Notes: European version)
- Harryausten (Notes: disassembled with UART connected)
- Jja2000
- Jrg (Notes: Broken touchscreen)
- MasterPlexus (Notes: still on Lineage)
- Nspire
- Rjeli
- Roboe (Notes: bloated battery (removed), might try to make a charging circuit or get a replacement sometime; aftermarket screen replacement, lot of issues with CPU suspend; running Lineage OS)
- Santeri3700
- Shubhamvis98
- Ungeskriptet (Notes: Glass lifts off a little, needs new glue)
Unlocking the Bootloader
WARNING: Doing this will wipe ALL data on your device. Please backup all your personal data before continuing!
- Enable
Developer options
by tapping the build number 7 times inSettings
>About
- Go to
Developer options
and enable bothUSB Debugging
andOEM Unlocking
- Open a terminal window and type
adb devices
to verify your device is visible. - Type
adb reboot bootloader
to reboot your device into fastboot mode. - Type
fastboot devices
to verify once again that your device is visible. - Type
fastboot oem unlock
. To navigate the on screen options use and select an option with the button. - Congrats, your bootloader is now unlocked!
Enter Flashmode
- After the bootloader is unlocked press the button and you should see the warning screen. Press to open the boot options.
- Select
Fastboot
and press
You are now ready to flash.