Jump to content

Samsung Galaxy Note 10.1 2014 (samsung-n1awifi)

From postmarketOS Wiki
Revision as of 01:24, 12 April 2022 by TheAceBlock (talk | contribs) (Made some clarifications as to what does not work and how to flash the zip file)
Samsung Galaxy Note 10.1 (2014)
n1awifi with the xfce GUI
n1awifi with the xfce GUI
Manufacturer Samsung
Name Galaxy Note 10.1 (2014)
Codename samsung-n1awifi
Released 2013
Hardware
Chipset Samsung Exynos 5420
CPU 1.9 Ghz A15 Quad + 1.3 Ghz A7 Quad
GPU Mali-T628 MP6
Display 2560x1600
Storage 16/32 GB
Memory 3 GB
Architecture armv7
Software
Original software Android 5.1.1
postmarketOS
Category testing
Pre-built images no
Mainline no
Features
Flashing
Broken
USB Networking
Partial
Internal storage
No data
SD card
No data
Battery
Works
Screen
Works
Touchscreen
Partial
Multimedia
3D Acceleration
No data
Audio
No data
Camera
Broken
Camera Flash
No data
Connectivity
WiFi
Works
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • Michaszek8

Maintainer(s)

Users owning this device


What does not work

  • KDE Plasma (boots into black screen)
  • Any DE that uses Wayland
  • Stylus
  • Touchscreen stops working after some minutes of uptime and after reboot The touchscreen does technically work, so does OTG mouse as the cursor does move around, but at least in Xfce4 the DE stopped responding to any input events. It's still "alive" (the clock does update, and anything that's running will keep running), it's just no longer responding to any mouse events or keystrokes. Do note, however, that Ctrl+Alt+F1, etc. still seems to work, as when switching to a tty, the cursor disappear, and when switching back to GUI with Ctrl+Alt+F7, the cursor comes back, however the tty could not be shown (the screen is stuck to the GUI no matter what I tried).
  • WiFi could connect, but the system cannot assign any IP address to the wlan0 interface.

How to enter flash mode

Press and hold Power + Volume Down + Home. Press Volume Up when prompted.

Installation

Create TWRP flashable zip:

$ pmbootstrap install --android-recovery-zip
$ pmbootstrap export

Run adb push /tmp/postmarketOS-export/pmos-samsung-n1awifi.zip to copy zip to the device, reboot to TWRP and install the zip and then reboot to system. You can also use adb sideload as instructed in recovery zip installation.


See also