Jump to content

OnePlus 3 (oneplus-oneplus3)

From postmarketOS Wiki
Revision as of 12:42, 12 May 2022 by Ungeskriptet (talk | contribs) (Add picture)
OnePlus 3
OnePlus 3 with Plasma Mobile UI
OnePlus 3 with Plasma Mobile UI
Manufacturer OnePlus
Name 3
Codename oneplus-oneplus3
Released 2016
Hardware
Chipset Qualcomm MSM8996 Snapdragon 820
CPU Kryo 2x2.2 GHz
2x1.6 Ghz
GPU Adreno 530
Display 1080x1920 AMOLED
Storage 64 GB
Memory 6 GB
Architecture aarch64
postmarketOS
Category testing
Pre-built images no
Mainline yes
Features
Flashing
Works
USB Networking
Broken
Internal storage
No data
SD card
No data
Battery
Broken
Screen
Broken
Touchscreen
Broken
Multimedia
3D Acceleration
Broken
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Broken
Bluetooth
Broken
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data

Contributors

Maintainer(s)

Users owning this device


Unlocking the Bootloader

WARNING: Doing this will wipe ALL data on your device. Please backup all your personal data before continuing!

  1. Enable Developer options by tapping the build number 7 times in Settings > About
  2. Go to Developer options and enable both USB Debugging and OEM Unlocking
  3. Open a terminal window and type adb devices to verify your device is visible.
  4. Type adb reboot bootloader to reboot your device into fastboot mode.
  5. Type fastboot devices to verify once again that your device is visible.
  6. Type fastboot oem unlock. To navigate the on screen options use Volume Up/Down and select an option with the Power button.
  7. Congrats, your bootloader is now unlocked!

Enter Flashmode

  1. After the bootloader is unlocked press the Power button and you should see the warning screen. Press Volume Up/Down to open the boot options.
  2. Select Fastboot and press Power

You are now ready to flash.

Installation

See Also