Jump to content

Xiaomi POCO F3 (xiaomi-alioth)

From postmarketOS Wiki
Revision as of 10:35, 1 October 2022 by TheNXGuy (talk | contribs)


Xiaomi Poco F3
Official image for the smartphone
Official image for the smartphone
Manufacturer Xiaomi
Name Poco F3
Codename xiaomi-alioth
Released 2021
Hardware
Chipset Qualcomm SM8250-AC Snapdragon 870 5G
CPU Octa-core (1x3.2 GHz Kryo 585 & 3x2.42 GHz Kryo 585 & 4x1.80 GHz Kryo 585)
GPU Adreno 650
Display 1080x2400 AMOLED, 120Hz, HDR10+, 1300 nits (peak)
Storage 128/256 GB UFS 3.1
Memory 6/8 GB RAM
Architecture aarch64
Software
Original software Android 11
postmarketOS
Category testing
Pre-built images no
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
No data
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
Broken
Bluetooth
No data
GPS
No data
NFC
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
HDMI/DP
No data
Sensors
Accelerometer
No data
Magnetometer
No data
Ambient Light
No data
Proximity
No data
Hall Effect
No data
Haptics
No data
Barometer
No data


Contributors

  • RodoMa92
  • Weijia

Maintainer(s)

Users owning this device


How to enter flash mode

Volume down + power to enter fastboot mode, volume up + power to enter recovery mode.

Installation

Flash LineageOS once, then follow the installation guide.

It is recommended to flash to the userdata partition instead of super:

$ pmbootstrap flasher flash_rootfs --partition userdata

Serial UART

TX is easily accessible, red wire on photo. RX is under a metal shield on the other side of the board. UART TX is below the sub board connector on the left size of a 0402 capacitor. Baud - 115200. For ground you can use the metal shielding.

See also