Jump to content

F(x)tec Pro1X (fxtec-qx1050)

From postmarketOS Wiki
Revision as of 13:11, 17 November 2022 by Knuxify (talk | contribs) (adjust to new chipset naming rules (https://gitlab.com/postmarketOS/wiki/-/issues/69))
🚧 This page is a work-in-progress. Some information contained within may be inaccurate or incomplete.
This device is marked as not booting.
F(x)tec Pro1X
F(x)tec Pro1X running Android with split screen multitasking
F(x)tec Pro1X running Android with split screen multitasking
Manufacturer F(x)tec
Name Pro1X
Codename fxtec-qx1050
Released 2022
Hardware
Chipset Qualcomm Snapdragon 662 (SM6115)
CPU 4x Kryo 260 Gold @ 2.0 GHz + 4x Kryo 260 Silver @ 1.8 GHz
GPU Adreno 610
Display 5.99″ 1080x2160 AMOLED
Storage 128GB/256GB
Memory 6GB/8GB LPDDR4
Architecture aarch64
Software
Original software Android 11/LineageOS/Ubuntu Touch
postmarketOS
Category testing
Pre-built images no


Contributors

Users owning this device


How to enter flash mode

Fastboot

Hold down Power and Volume Down while the device is off until you're in fastboot mode.

Recovery

Hold down Power and Volume Up while the device is off until you're in recovery mode.

EDL

Bootloader

Hold down Volume Up and Volume Down and plug in the USB cable while the device is off. The device should now be in QDL mode.

Deep Flash Cable

If your bootloader is corrupted, the deep flash cable can be used to reflash the bootloader or other part of the device.

Installation

See also