Xiaomi POCO F3 (xiaomi-alioth)
Appearance
![]() Official image for the smartphone | |
Manufacturer | Xiaomi |
---|---|
Name | Poco F3 |
Codename | xiaomi-alioth |
Released | 2021 |
Hardware | |
Chipset | Qualcomm Snapdragon 870 5G (SM8250-AC) |
CPU | Octa-core (1x3.2 GHz Kryo 585 & 3x2.42 GHz Kryo 585 & 4x1.80 GHz Kryo 585) |
GPU | Adreno 650 |
Display | 1080x2400 AMOLED, 120Hz, HDR10+, 1300 nits (peak) |
Storage | 128/256 GB UFS 3.1 |
Memory | 6/8 GB RAM |
Architecture | aarch64 |
Software | |
Original software | Android 11 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | partial |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
No data |
SD card |
No data |
Battery |
No data |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
Bluetooth |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Contributors
- RodoMa92
- Weijia
Maintainer(s)
Users owning this device
- Lucacraft89 (Notes: Trying to install pmOS)
- Nikroks
- TheNXGuy (Notes: Working on mainline. Basic framebuffer works.)
- Weijia (Notes: Running pmOS)
How to enter flash mode
Volume down + power to enter fastboot mode, volume up + power to enter recovery mode.
Installation
Flash LineageOS once, then follow the installation guide.
It is recommended to flash to the userdata partition instead of super:
$ pmbootstrap flasher flash_rootfs --partition userdata
Serial UART
UART TX is below the sub board connector on the left size of a 0402 capacitor. Baud - 115200.
For ground you can use the metal shielding.